hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.33.2 Conformance requirement | When the UE receives a PAGING TYPE 1 message, it shall perform the actions as specified below.
If the UE is in connected mode, for each occurrence of the IE "Paging record" included in the message the UE shall:
1> if the IE "Used paging identity" is a UTRAN identity and if this U-RNTI is the same as the U-RNTI allocate... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.33.3 Test purpose | To confirm that the UE enters the CELL_DCH state after it receives a CELL UPDATE CONFIRM message with a physical channel configuration causing it to start HS-DSCH reception on a different cell and frequency. To confirm that the UE enters CELL_PCH state on another frequency and stops HS-DSCH reception when it receives ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.33.4 Method of test | Initial Condition
System Simulator: 2 cells - cell 1 is active and cell 6 is inactive.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS_DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or TDD
- UE supports HS-PDSCH
Test Procedure
Table ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.33.5 Test requirement | After step 2, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 5, the UE shall transmit a CELL UPDATE message.
After step 8, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC in cell 1.
8.3.1.33a... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.34 Cell Update: Transition from CELL_DCH to CELL_FACH, stop of HS-DSCH reception | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.34.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.34.2 Conformance requirement | 1> Radio link failure:
…
3> if the UE is in CELL_DCH state and the criteria for radio link failure are met as specified in subclause 8.5.6 of TS 25.331; or
…
4> perform cell update using the cause "radio link failure".
When initiating the URA update or cell update procedure, the UE shall:
…
1> if HS-DSCH is configured:... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.34.5 Test requirement | After step 2, the UE shall transmit a CELL UPDATE message and stop HS-DSCH reception. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.35 Cell Update: Transition from CELL_DCH to CELL_DCH, with active HS-DSCH reception | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.35.1 Definition | 8.3.1.35.2 Conformance requirement
1> Radio link failure:
…
3> if the UE is in CELL_DCH state and the criteria for radio link failure are met as specified in subclause 8.5.6 of TS 25.331; or
…
4> perform cell update using the cause "radio link failure".
When initiating the URA update or cell update procedure, the UE s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.35.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 2 is inactive.
Specific Message Contents
System Information Block type 11
Use the default system information block with the same type specified in clause 9 of TS 34.108, with the following exceptions:
Information Element
Value/remark
- Periodic Rep... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.35.5 Test requirement | After step 2, the UE shall transmit a CELL UPDATE message.
After step 4, the UE shall transmit a TRANSPORT CHANNEL RECONFIGURATION COMPLETE message and start reception of HS-DSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.36 Cell Update: Transition from CELL_DCH to CELL_FACH (stop of HS-DSCH reception with frequency modification) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.36.1 Definition | (All UEs which support FDD or TDD and HS-PDSCH.)
8.3.1.36.2 Conformance requirement
1> Radio link failure:
…
3> if the UE is in CELL_DCH state and the criteria for radio link failure are met as specified in subclause 8.5.6; or
…
4> perform cell update using the cause "radio link failure".
When initiating the URA updat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.36.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS-DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.3.1.36
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA RF Channel Number
Mid R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.36.5 Test requirement | After step 2, the UE shall transmit a CELL UPDATE message and stop HS-DSCH reception. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.37 Cell Update: Transition from CELL_DCH to CELL_DCH (with active HS-DSCH reception and frequency modification) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.37.1 Definition | (All UEs which support FDD or TDD and HS-PDSCH.)
8.3.1.37.2 Conformance requirement
1> Radio link failure:
…
3> if the UE is in CELL_DCH state and the criteria for radio link failure are met as specified in subclause 8.5.6; or
…
4> perform cell update using the cause "radio link failure".
When initiating the URA updat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.37.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 is active and cell 6 is inactive.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: PS-DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.3.1.37
Parameter
Unit
Cell 1
Cell 6
T0
T1
T0
T1
UTRA RF Channel Number
Mid R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.37.5 Test requirement | After step 2, the UE shall transmit a CELL UPDATE message.
After step 4, the UE shall transmit a TRANSPORT CHANNEL RECONFIGURATION COMPLETE message and start reception of HS-DSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.38 Cell Update: state specific handling of Treselection and Qhyst for cell reselection in CELL_FACH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.38.1 Conformance requirement | 2. The cell-ranking criterion R is defined by:
The cells shall be ranked according to the R criteria specified above, deriving Qmeas,n and Qmeas,s and calculating the R values using CPICH RSCP, P-CCPCH RSCP and the averaged received signal level as specified in [10] and [11] for FDD, TDD and GSM cells, respectively.
Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.38.2 Test purpose | 1. To confirm that the UE uses the correct SIB 4 IEs to perform cell reselection calculation in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.38.3 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 4 are active.
UE: PS-DCCH+DTCH_FACH (state 6-11) in cell 1 as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.3.1.38
Parameter
Unit
Cell 1
Cell 4
T0
T1
T2
T0
T1
T2
UTRA RF Channel Number
Mid Range Test Frequency
High Range Test Frequency
CPICH Ec (... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.38.4 Test requirement | At step 2 no cell update is received, even after expiry of Treselelection
At step 3 no cell update is received until after Treselection has expired.
At step 4 the UE shall reselect to cell 4 and then it shall transmit a CELL UPDATE message which sets the value "cell reselection" in IE "Cell update cause". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.39 Cell Update: state specific handling of Treselection and Qhyst for cell reselection in CELL_PCH | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.39.1 Conformance requirement | 2. The cell-ranking criterion R is defined by:
The cells shall be ranked according to the R criteria specified above, deriving Qmeas,n and Qmeas,s and calculating the R values using CPICH RSCP, P-CCPCH RSCP and the averaged received signal level as specified in [10] and [11] for FDD, TDD and GSM cells, respectively.
Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.39.2 Test purpose | 1. To confirm that the UE uses the correct SIB 4 IEs to perform cell reselection calculation in CELL_PCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.39.3 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 and 4 are active.
UE: CELL_PCH (state 6-12) in cell 1 as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.3.1.39
Parameter
Unit
Cell 1
Cell 4
T0
T1
T2
T0
T1
T2
UTRA RF Channel Number
Mid Range Test Frequency
High Range Test Frequency
CPICH Ec (FDD)
dBm/... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.39.4 Test requirement | At step 2 no cell update is received, even after expiry of Treselelection
At step 3 no cell update is received until after Treselection has expired.
At step 4 the UE shall reselect to cell 4 and then it shall transmit a CELL UPDATE message which sets the value "cell reselection" in IE "Cell update cause". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.40 Cell update: Transition from CELL_PCH to CELL_DCH, inclusion of establishment cause | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.40.1 Definition | 8.3.1.40.2 Conformance requirement
Upon initiation of the initial direct transfer procedure when the UE is in CELL_PCH or URA_PCH state, the UE shall:
1> perform a cell update procedure, according to subclause 8.3.1, using the cause "uplink data transmission";
1> when the cell update procedure completed successfully:
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.40.3 Test purpose | 1. To confirm that, in the case the Cell Update procedure is initiated by a UE in CELL_PCH state in order to transmit the Initial Direct Transfer message, the UE shall include the IE “Establishment cause” and the IE “CS Call type” for a Rel-7 or later UE in the Cell Update message.
2. To confirm that the IE “Establishm... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.40.4 Method of test | Initial Condition
System Simulator: 1 cell
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
UE: CELL_PCH (state 6-12) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports PS+CS
Test Procedure
The test operator is prompted to make an out-going CS call. Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.40.5 Test requirement | After step 1, the UE shall transmit a CELL UPDATE message where the IE "Cell update cause" is set to "uplink data transmission", the IE “Establishment cause” is set to “Originating conversation call” and the IE “CS Call Type” is present for a Rel-7 or later UE.
After step 3 the UE shall transmit a PHYSICAL CHANNEL RECO... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.41 Cell Update: Transition from URA_PCH to CELL_DCH: Success (start of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.41.1 Definition | All UEs which support FDD and HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH.
8.3.1.41.2 Conformance requirement
When the UE receives a PAGING TYPE 1 message, it shall perform the actions as specified below.
If the UE is in connected mode, for each occurrence of the IE "Paging record" inclu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.41.5 Test requirement | After step 1, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 3, the UE shall transmit a CELL UPDATE message on uplink CCCH.
After step 5, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
8.3.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.42 Cell Update: Transition from CELL_PCH to CELL_DCH: Success (frequency modification, start of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.42.1 Definition | All UEs which support FDD and HS-PDSCH and E-DPDCH and all UEs which support TDD and HS-PDSCH and E-PUCH..
8.3.1.42.2 Conformance requirement
When the UE receives a PAGING TYPE 1 message, it shall perform the actions as specified below.
If the UE is in connected mode, for each occurrence of the IE "Paging record" incl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.42.5 Test requirement | After step 2, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
After step 5, the UE shall transmit a CELL UPDATE message on the uplink CCCH.
After step 8, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC in cell 1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.43 Cell Update: Radio Link Failure, with active E-DCH transmission | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.43.1 Definition | All UEs which support FDD or TDD and HS-PDSCH and E-DPDCH for FDD or E-PUCH for TDD, and fully support F-DPCH (FDD only). |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.43.2 Conformance requirement | 1> Radio link failure:
…
3> if the UE is in CELL_DCH state and the criteria for radio link failure are met as specified in subclause 8.5.6 of TS 25.331; or
…
4> perform cell update using the cause "radio link failure".
When initiating the URA update or cell update procedure, the UE shall:
…
1> if any IEs related to HS-... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.43.3 Test purpose | 1. To confirm that the UE detects the radio link failure condition when the F-DPCH physical channel is established (FDD only).
2. To confirm that the UE stops the E-DCH transmission and performs a Cell Update procedure after radio link failure.
3. To confirm that the UE keeps the radio bearer mapping option and transpo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.43.4 Method of test | Initial Condition
System Simulator: 1 cell – Cell 1
UE: PS-DCCH_DCH (state 6-7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD or 1.28 Mcps TDD
- UE supports HS-PDSCH
- UE supports E-DPDCH for FDD or E-PUCH for 1.28 Mcps TDD
- UE fully supports F-DPCH (FDD only)
Test Procedure
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.43.5 Test requirement | After step 2, the UE shall transmit a CELL UPDATE message.
After step 4, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message and start transmission on E-DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.44 Cell Update: Transition from CELL_PCH to CELL_DCH: Success (frequency modification, start of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.44.1 Definition | All UEs which support FDD and UL DTX.
8.3.1.44.2 Conformance requirement
When the UE receives a PAGING TYPE 1 message, it shall perform the actions as specified below.
If the UE is in connected mode, for each occurrence of the IE "Paging record" included in the message the UE shall:
1> if the IE "Used paging identity"... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.44.5 Test requirement | At step 3, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 6, the UE shall transmit a CELL UPDATE message on the uplink CCCH.
At step 9, the UE shall transmit a RADIO BEARER RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC in cell 1.
At step... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.45 Cell Update: Radio Link Failure, with active discontinuous uplink transmission | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.45.1 Definition | All UEs which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.45.2 Conformance requirement | 1> Radio link failure:
…
3> if the UE is in CELL_DCH state and the criteria for radio link failure are met as specified in subclause 8.5.6 of TS 25.331; or
…
4> perform cell update using the cause "radio link failure".
When initiating the URA update or cell update procedure, the UE shall:
…
1> if any IEs related to HS-... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.45.3 Test purpose | 1. To confirm that the UE stops the E-DCH transmission with DTX and performs a Cell Update procedure after radio link failure.
2. To confirm that the UE keeps the radio bearer mapping option and transport channel configuration for E-DCH after the radio link failure. To confirm that the UE resumes the E-DCH transmissio... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.45.4 Method of test | Initial Condition
System Simulator: 1 cell – Cell 1
UE: PS-DCCH_DCH (state 6-7) with SRBs mapped to E-DCH/HS-DSCH as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports discontinuous uplink transmission.
Test Procedure
Table 8.3.1.45
Parameter
Unit
Cell 1
T0
T1
UTRA RF Ch... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.45.5 Test requirement | At step 3, the UE shall transmit a CELL UPDATE message.
At step 5, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message and start transmission on E-DCH. At step 6 the time between 11 consecutive CQI indications shall be 400ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.46 Cell Update: Transition from URA_PCH to CELL_DCH: Success (start of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.46.1 Definition | All UEs which support FDD and UL DTX.
8.3.1.46.2 Conformance requirement
When the UE receives a PAGING TYPE 1 message, it shall perform the actions as specified below.
If the UE is in connected mode, for each occurrence of the IE "Paging record" included in the message the UE shall:
1> if the IE "Used paging identity"... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.46.5 Test requirement | At step 2, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 4, the UE shall transmit a CELL UPDATE message on uplink CCCH.
At step 6, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message on the uplink DCCH using AM RLC.
At step 7 the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.47 Cell Update: cell reselection in CELL_FACH (Reselection between cell not supporting HS-PDSCH in CELL_FACH and cell supporting HS-PDSCH is CELL_FACH) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.47.1 Definition and applicability | All UEs which support FDD and HS-PDSCH in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.47.2 Conformance requirement | In the CELL_FACH state the UE shall perform the following actions:
1) NOTE: DCCH and, if configured, DTCH are available in this state.
1> if the UE is "in service area":
2> maintain up-to-date system information as broadcast by the serving cell as specified in subclause 8.1.1;
2> perform cell reselection process as spe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.47.3 Test purpose | 1. To confirm that the UE starts reception of HS-PDSCH in CELL_FACH state, after reselecting to a cell supporting HS-PDSCH in CELL_FACH.
2. To confirm that the UE performs the cell reselection procedure while receiving HS-PDSCH in CELL_FACH state.
3. To confirm that the UE can receive data on DCCH (SRB#1) HS-DSCH using... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.47.4 Method of test | Initial Condition
System Simulator: 2 cells: Cell 1 sends the default system information (HS-DSCH for CELL_FACH not configured), Cell 6 configures HS-DSCH for CELL_FACH in System Information Type 5.
UE: PS-DCCH+DTCH_FACH (state 6-11) in cell 1 as specified in clause 7.4 of TS 34.108.
For cell 2, the following parameter... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.47.5 Test requirements | At step 3 the UE shall reselect to cell 6 and then it shall transmit a CELL UPDATE message which sets the value "cell reselection" in IE "Cell update cause" and “HS-PDSCH in CELL_FACH” set to TRUE.
At step 5 the UE shall not respond to the CELL UPDATE CONFIRM in step 4. The UE will instead transmit CELL UPDATE after e... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.48 Cell Update: Radio Link Failure, UM RLC Re-establishment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.48.1 Definition | All UEs which support CS over HSPA. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.48.2 Conformance requirement | The cell update procedure may also include:
- a re-establish of AM RLC entities;
- a re-establish of UM RLC entities;
- a radio bearer release, radio bearer reconfiguration, transport channel reconfiguration or physical channel reconfiguration.
…
A UE shall initiate the cell update procedure in the following cases:
…
1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.48.3 Test purpose | 1. To confirm that UE performs UM RLC re-establishment on CS over HSPA RAB following CELL UPDATE with cause "radio link failure". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.48.4 Method of test | Initial Condition
System Simulator: 1 cell – Cell 1
UE is in Idle mode (state 2 or state 7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports CS over HSPA.
Test Procedure
The SS setups a circuit switched session including radio bearer and UE test loop mode 1 in RLC U... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.48.5 Test requirement | At step 5, the UE shall transmit a CELL UPDATE message with cause radio link failure.
At steps 8 and 9 the UE shall successfully loop back all the data packets after UM RLC re-establishment. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.49 Cell Update: Intra Frequency cell reselection in Enhanced CELL_FACH with DRX configured | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.49.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.49.2 Conformance requirement | The UE should store all relevant IEs included in this system information block. The UE shall
…
1> if the UE is in CELL_FACH state or Idle mode; and
1> if the UE does support E-DCH transmission in CELL_FACH state and Idle mode; and
1> if the IE "HS-DSCH common system information" is included in system information block ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.49.3 Test purpose | 1. To confirm that the UE performs Intra Frequency cell reselection in Enhanced CELL_FACH state when Enhanced DRX is configured. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.49.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 configures Common E-DCH / HS-DSCH for CELL_FACH in System Information Type 5 with Enhanced DRX and Cell 2 configures Common E-DCH / HS-DSCH for CELL_FACH in System Information Type 5
UE: PS-DCCH Enhanced CELL_FACH (state 6-11) as specified in clause 7.4 of TS 34.108 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.49.5 Test requirement | At step 3 the UE shall reselect to cell 2 and then it shall transmit a CELL UPDATE message which sets the value "cell reselection" in IE "Cell update cause", "HS-PDSCH in CELL_FACH” and " Support of HS-DSCH DRX operation " set to TRUE.
At step 5 the UE shall transmit UTRAN MOBILITY INFORMATION CONFIRM on UL.
8.3.1.49a ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.50 Cell Update: Cell reselection in CELL_FACH when common E-DCH resource is released | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.50.1 Definition and applicability | UE supports FDD and Enhanced Uplink in CELL_FACH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.50.2 Conformance requirement | In all cases, the UE shall reselect the new cell, only if the following conditions are met:
- the new cell is better ranked than the serving cell during the preceding time interval Treselection. For UE in RRC connected mode states CELL_PCH or URA_PCH the interval Treselections,PCH applies, if provided in SIB4 [see 4], ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.50.3 Test purpose | 1. To confirm that the UE performs cell reselection in Enhanced CELL_FACH state when common E-DCH resource is released. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.50.4 Method of test | Initial Condition
System Simulator: 2 cells – Both cells configure Common E-DCH for CELL_FACH in System Information Type 5.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message contents).
SYSTEM INFORMATION BLOCK TYPE 5 (see specific message contents).
SYSTEM INFORMATION BLOCK TYPE 3/4 (see specific message contents).... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.50.5 Test Requirement | At step 2a, UE should not send Cell Update message.
At step 5, UE reselects the Cell 2 and sends Cell Update with cause “Cell reselection”. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.51 Cell Update: Cell reselection in CELL_FACH (Reselection between cell not supporting HS-PDSCH and E-DCH in CELL_FACH and cell supporting HS-PDSCH and E-DCH in CELL_FACH) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.51.1 Definition and applicability | All UEs which support LCR TDD and HS-PDSCH and E-DCH in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.51.2 Conformance requirement | In the CELL_FACH state the UE shall perform the following actions:
NOTE: DCCH and, if configured, DTCH are available in this state.
1> if the UE is "in service area":
2> maintain up-to-date system information as broadcast by the serving cell as specified in subclause 8.1.1;
2> perform cell reselection process as specif... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.51.3 Test purpose | 1. To confirm that the UE starts reception of HS-PDSCH in CELL_FACH state, after reselecting to a cell supporting HS-PDSCH in CELL_FACH.
2. To confirm that the UE performs the cell reselection procedure while receiving HS-PDSCH in CELL_FACH state.
3. To confirm that the UE can receive data on DCCH (SRB#1) HS-DSCH using... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.51.4 Method of test | Initial Condition
System Simulator: 2 cells: Cell 1 sends the default system information (HS-DSCH for CELL_FACH not configured), Cell 6 configures HS-DSCH for CELL_FACH in System Information Type 5.
UE: PS-DCCH+DTCH_FACH (state 6-11) in cell 1 as specified in clause 7.4 of TS 34.108.
For cell 2, the following parameter... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.51.5 Test requirements | At step 3 the UE shall reselect to cell 6 and then it shall transmit a CELL UPDATE message which sets the value "cell reselection" in IE "Cell update cause" and “HS-PDSCH in CELL_FACH” and “Support of common E-DCH” set to TRUE.
At step 5 the UE shall not respond to the CELL UPDATE CONFIRM in step 4. The UE will instead... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.52 Cell Update: Inter Frequency cell reselection in CELL_FACH based on absolute priority | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.52.1 Definition and applicability | All UEs which support UTRA FDD, EUTRA and Rel 8 absolute priority cell reselection for high priority layers in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.52.2 Conformance requirement | 5.2.6.1.2a Measurement rules for inter-frequency and inter-RAT cell reselection when absolute priorities are used
The measurement rules below apply in Idle, URA_PCH, CELL_PCH states. In CELL_FACH state, if (High Priority Layers is indicated in CELL_FACH Absolute Priority Measurement Indicator [4] and SrxlevServingCell ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.52.3 Test purpose | 1. To confirm that UE does not perform higher priority cell reselection based on absolute priority in CELL_FACH state, when power levels do not meet cell reselection criteria.
2. To confirm that UE performs higher priority cell reselection based on absolute priority in CELL_FACH state, when power levels meet cell resel... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.52.4 Method of test | Initial conditions
System Simulator:
- 2 cells Cell 1 and Cell 4
- Cell 2 is mapped to cell 4 (inter frequency) of 34.108 clause 6.1 and both cells belong to different frequency bands.
- Cell 1 as the active cell with SS downlink transmission power settings according to “T0” in table 8.3.1.x below.
- SIB19 to be transm... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.52.5 Test requirements | 1. At step 4, UE does not perform cell reselection to high priority cell 4, as cell reselection criterion is not satisfied.
2. At step 6, UE reselects to higher priority cell 4, as cell reselection criteria matches and sends a CELL UPDATE with cause: cell reselection. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.53 Cell Update: Absolute priority based cell reselection failure to inter-frequency cell for which no priority or no threshold is assigned | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.53.1 Definition and applicability | All UEs which support UTRA FDD, EUTRA and Rel 8 absolute priority cell reselection for high priority layers in CELL_FACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.53.2 Conformance requirement | 5.2.6.1.2a Measurement rules for inter-frequency and inter-RAT cell reselection when absolute priorities are used
The measurement rules below apply in Idle, URA_PCH, CELL_PCH states. In CELL_FACH state, if (High Priority Layers is indicated in CELL_FACH Absolute Priority Measurement Indicator [4] and SrxlevServingCell ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.53.3 Test purpose | 1. To confirm that if priority information is provided for any inter-frequency layers, cells belonging to inter-frequency layers for which no priority or no threshold is assigned shall not be considered for reselection.
2. To confirm that UE performs higher priority cell reselection based on absolute priority in CELL_F... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.1.53.4 Method of test | Initial conditions
System Simulator:
2 cells Cell 1 and Cell 4
Cell5 is a dummy cell referenced in SIB-19
Cell 1 is the active cell with SS downlink transmission power settings according to “T0” in table 8.3.1.53 below.
System Information Block type 11
Use the same message type found in clause 6.1 of TS 34.108, with th... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.