hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.1 Active set update in soft handover: Radio Link addition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.1.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified otherwise in the following. The UE shall:
1> first add the RLs indicated in the IE "Radio Link Addition Information";
1> perform the physical layer synchronisa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.1.3 Test purpose | 1. To confirm that the UE continues to communicate with the SS on both the additional radio link and an already existing radio link after the radio link addition. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.1.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE.
Test Procedure
Table 8.3.4.1
Parameter
Unit
Cell 1
Cell 2
T0
T1
T2
T3
T0
T1
T2
T3
UTR... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.1.5 Test requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set additional procedure.
After step 5 the UE shall transmit a MEASUREMENT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.2 Active set update in soft handover: Radio Link removal | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.2.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in 8.6, unless specified otherwise in the following.
The UE may:
1> maintain a list of the set of cells to which the UE has Radio Links if the IE "Cell ID" is present.
The UE shall:
1> first add the RLs i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.2.3 Test purpose | 1. To confirm that the UE continues to communicate with the SS on the remaining radio link after radio link removal on the active set.
2. To confirm that the UE is not using the removed radio link to communicate with the SS. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.2.4 Method of test | Initial Condition
System Simulator: 2 cells - both Cell 1 and Cell 2 are active
Specific Message Contents
System Information Block type 1 (FDD)
Use the default system information block with the same type specified in clause 9 of TS 34.108, with the following exceptions:
Information Element
Value/remark
- UE Timers and ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.2.5 Test requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set additional procedure.
After step 5 the UE shall transmit a MEASUREMENT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.3 Active set update in soft handover: Combined radio link addition and removal | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.3.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in 8.6, unless specified otherwise in the following. The UE shall:
1> first add the RLs indicated in the IE "Radio Link Addition Information";
1> remove the RLs indicated in the IE "Radio Link Removal Inf... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.3.3 Test purpose | 1. To confirm that the UE continues to communicate with the SS on the added radio link and removes radio link which exists prior to the execution of active set update procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.3.4 Method of test | Initial Condition
System Simulator: 3 cells- Cell 1, Cell 2 and Cell 3 are active, with downlink transmission power settings according to columns "T0" in table 8.3.4.3.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain support... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.3.5 Test requirement | At step 0a the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 0c the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH.
After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.4 Active set update in soft handover: Invalid Configuration | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.4.2 Conformance requirement | If any of the following conditions are valid:
…
- a radio link in the IE "Radio link addition information" is also present in the IE "Radio Link Removal Information"; and/or
…
- the variable INVALID_CONFIGURATION is set to TRUE:
the UE shall:
1> keep the active set as it was before the ACTIVE SET UPDATE message was rec... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.4.3 Test purpose | 1. To confirm that the UE transmits an ACTIVE SET UPDATE FAILURE message on the DCCH using AM RLC, if the received ACTIVE SET UPDATE message includes a radio link which is specified in both IE "Radio Link Addition Information" and IE "Radio Link Removal Information". |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.4.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE.
Test Procedure
Table 8.3.4.4
Parameter
Unit
Cell 1
Cell 2
T0
T1
T0
T1
UTRA RF Channe... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.4.5 Test requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit an ACTIVE SET UPDATE FAILURE message, setting "Invalid configuration" in IE "failure cause" and sent on the uplink DCCH using AM RLC.
After step 4 the UE shall transmit a MEASUREMENT REPOR... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.5 Active set update in soft handover: Reception of an ACTIVE SET UPDATE message in wrong state | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.5.2 Conformance requirement | If the UE is in another state than CELL_DCH state upon reception of the ACTIVE SET UPDATE message, the UE shall perform procedure specific error handling as follows. The UE shall:
1> transmit a ACTIVE SET UPDATE FAILURE message on the uplink DCCH using AM RLC;
1> set the IE "RRC transaction identifier" in the ACTIVE SE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.5.3 Test purpose | 1. To confirm that the UE transmits an ACTIVE SET UPDATE FAILURE message when it receives an ACTIVE SET UPDATE message in any state other then CELL_DCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.5.4 Method of test | Initial Condition
System Simulator: 2 cells – Cell 1 and 2 are active.
UE: PS-DCCH+DTCH_FACH (state 6-11) in cell 1 as specified in clause 7.4 of TS 34.108.
Test Procedure
Table 8.3.4.5
Parameter
Unit
Cell 1
Cell 2
UTRA RF Channel Number
Mid Range Test Frequency
Mid Range Test Frequency
CPICH Ec
dBm/3.84MHz
-60
-70
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.5.5 Test requirement | After step 0a, the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH, reporting the RLC buffer payload of each RBs mapped on RACH at every 8s interval.
After step 3 the UE shall transmit an ACTIVE SET UPDATE FAILURE message on the DCCH. In this message, the value "Message not compatible with receiver st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.6 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.7 Active set update in soft handover: Invalid Message Reception | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.7.2 Conformance Requirement | If the ACTIVE SET UPDATE message contains a protocol error causing the variable PROTOCOL_ERROR_REJECT to be set to TRUE according to TS 25.331 clause 9, the UE shall perform procedure specific error handling as follows. The UE shall:
1> transmit a ACTIVE SET UPDATE FAILURE message on the uplink DCCH using AM RLC;
1> se... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.7.3 Test Purpose | 1. To confirm that the UE retains its active set list and transmits an ACTIVE SET UPDATE FAILURE message when it receives an invalid ACTIVE SET UPDATE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.7.4 Method of test | Initial Condition
System Simulator: 2 cells – both cell 1 and cell 2 are active.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE (Integrity protection algorithm is not applied at the start of test)
Test P... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.7.5 Test Requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit an ACTIVE SET UPDATE FAILURE message on the DCCH. In this message, the value "Message extension not comprehended" shall be set in IE "Protocol Error Information".
After step 4 the UE shall... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.8 Active set update in soft handover: Radio Link addition in multiple radio link environment | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.8.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified otherwise in the following. The UE shall:
1> first add the RLs indicated in the IE "Radio Link Addition Information";
1> perform the physical layer synchronisa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.8.3 Test purpose | To confirm that the UE communicates with the SS on all radio link in the active set and keeps the connection when some of the radio links are faded out. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.8.4 Method of test | Initial Condition
System Simulator: 4 cells - Cell 1, 2, 3 and 7 are active. The chip-timing between the cells shall always be within 148 chip.
UE: CS-DCCH+DTCH_DCH (state 6-9) or PS-DCCH+DTCH_DCH (state 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE.
Test Proc... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.8.5 Test requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set additional procedure.
After step 5 the UE shall transmit a UE CAPABILI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.9 Active set update in soft handover: Radio Link removal (stop of HS-PDSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.9.1 Definition and applicability | All UEs which support FDD and HS-PDSCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.9.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in 8.6, unless specified otherwise in the following. The UE shall:
1> first add the RLs indicated in the IE "Radio Link Addition Information";
1> remove the RLs indicated in the IE "Radio Link Removal Inf... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.9.3 Test purpose | 1. To confirm that the UE continues to communicate with the SS on the remaining radio link after radio link removal on the active set.
2. To confirm that UE removes the HS-PDSCH configuration when the serving HS-DSCH radio link is removed.
3. To confirm that the UE is not using the removed radio link to communicate wit... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.9.4 Method of test | Initial Condition
System Simulator: 2 cells - both Cell 1 and Cell 2 are active
Specific Message Contents
System Information Block type 11
Use the default system information block with the same type specified in clause 9 of TS 34.108, with the following exceptions:
Information Element
Value/remark
- Periodic Reporting/... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.9.5 Test requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
After step 3 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set additional procedure.
After step 5 the UE shall transmit a MEASUREMENT... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.10 Active set update in soft handover: Radio Link addition and serving HS-DSCH / E-DCH cell change | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.10.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DPDCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.10.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in TS 25.331 subclause 8.6, unless specified otherwise in the following. The UE shall:
1> first add the RLs indicated in the IE "Radio Link Addition Information";
1> perform the physical layer synchronisa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.10.3 Test purpose | To confirm that the UE performs a radio link addition with serving HS-DSCH / E-DCH serving cell change according to the received ACTIVE SET UPDATE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.10.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and 2 are active
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A13, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports HS-PDSCH
- UE supports E-DPDCH
Test Procedure
Table 8.3.4.10
Parameter
Unit
Cell 1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.10.5 Test requirement | After step 3 the UE shall transmit a MEASUREMENT REPORT message.
After step 6 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.11 Active set update in soft handover: Radio Link addition/removal and serving HS-DSCH / E-DCH cell change, with discontinuous uplink transmission | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.11.1 Definition and applicability | All UEs which support FDD and UL DTX |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.11.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in 8.6, unless specified otherwise in the following.
The UE may:
1> maintain a list of the set of cells to which the UE has Radio Links if the IE "Cell ID" is present.
The UE shall:
1> first add the RLs i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.11.3 Test purpose | 1. To confirm that the UE performs a radio link addition involving a HS-DSCH / E-DCH serving cell change, with discontinuous transmissions according to the received ACTIVE SET UPDATE message.
2. To confirm that the UE performs a further radio link addition in the absence of discontinuous transmission according to the r... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.11.4 Method of test | Initial Condition
System Simulator: 3 cells - Cell 1, 2 are active and cell 3 is switched off
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
• UE supports FDD
- UE supports DPCCH Discontinuous Transmission
Test Procedure
Table 8.3.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.11.5 Test requirement | After step 1 the UE shall transmit a MEASUREMENT REPORT message.
At step 6 the time between 11 consecutive CQI indications shall be 320ms if 2ms TTI is used, or 400ms if 10ms TTI is used.
After step 13 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message.
After step 19 the UE shall transmit a MEASUREMENT REPORT ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.12 Active set update in soft handover: Radio Link addition/removal (stop and start of UL 16QAM) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.12.1 Definition and applicability | All UEs which support FDD, E-DCH and UL 16 QAM. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.12.2 Conformance requirement | Upon reception of an ACTIVE SET UPDATE message the UE shall act upon all received information elements as specified in 8.6, unless specified otherwise in the following.
The UE may:
1> maintain a list of the set of cells to which the UE has Radio Links if the IE "Cell ID" is present.
The UE shall:
1> first add the RLs i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.12.3 Test purpose | 1. To confirm that the UE starts E-DCH transmission using 16AM modulation according to the ACTIVE SET UPDATE message.
2. To confirm that the UE stops E-DCH transmission using 16AM modulation according to the ACTIVE SET UPDATE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.12.4 Method of test | Initial Condition
System Simulator: 2 cells - both Cell 1 and Cell 2 are active
UE: Idle state (State 3 or State 7) as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports HS-PDSCH
- UE supports UL 16QAM
- UE fully supports F-DPCH
Specific Message Contents
System Informat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.12.5 Test requirement | At step 3 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At step 5 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set addition procedure and active UL 16QAM.
At step 6 the UE shall transmit loop... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.13 Active set update in soft handover: Radio Link addition/removal and serving HS-DSCH / E-DCH cell change, with activation/deactivation of 64QAM | 8.3.4.13.1 Definition and Applicability
All UEs which support FDD ,mac-ehs and 64QAM
8.3.4.13.2 Conformance Requirement
In case the procedure was triggered by reception of a RADIO BEARER RECONFIGURATION message, the UE shall:
1> transmit a RADIO BEARER RECONFIGURATION COMPLETE as response message on the uplink DCCH... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.13.3 Test purpose | 3. To confirm that the UE starts HS-DSCH transmission using DL 64AM modulation according to the ACTIVE SET UPDATE message.
4. To confirm that the UE stops HS-DSCH transmission using DL 64AM modulation according to the ACTIVE SET UPDATE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.13.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 and 2 are active
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A17b, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE supports mac-ehs and 64QAM
- UE fully supports F-DPCH
Test Procedure
Table 8.3.4.13
Param... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.13.5 Test requirement | At step 3 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At step 5 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set addition procedure and DL 64QAM.
At step 6 the UE should receive UE CAPABILI... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.14 Active Set Update in Soft Handover: Radio Link addition/removal and serving HS-DSCH / E-DCH cell change with activation/deactivation of MIMO | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.14.1 Definition and applicability | All UE categories which support MIMO and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.14.2 Conformance requirement | If the UE receives an ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> if the IE "MIMO parameters" is not included:
2> clear the MIMO_PARAMS variable;
2> trigger lower layers to stop operation in MIMO mode.
1> otherwise:
2> for FDD, if the IE "MIMO N_cqi_typeA/M_cqi ratio" is included:
3> stor... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.14.3 Test purpose | 1. To confirm that the UE starts MIMO reception according to the received ACTIVE SET UPDATE message.
2. To confirm that the UE maintains MIMO reception according to the received ACTIVE SET UPDATE message
3. To confirm that the UE stops MIMO reception according to the received ACTIVE SET UPDATE message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.14.4 Method of test | Initial Condition
System Simulator: 3 cells – Cell 1 non MIMO cell, Cell 2 MIMO configured, Cell 3 MIMO configured
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-17) under condition A17b, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE category supports MIMO
- UE fully supports F-... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.14.5 Test requirements | At steps 3, 11, 16, 24, 29 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At steps 5, 13, 18 and 26, 31 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the previous ACTIVE SET UPDATE and indicate readiness to accept the new ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.15 Active set update: Dual Cell (DC) Activation by Serving Cell Change from non DC-HSDPA capable cell to DC-HSDPA capable cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.15.1 Definition and applicability | All UE categories which support Dual Cell HSDPA. UE supports F-DPCH or Enhanced F-DPCH.
8.3.4.15.2 Conformance requirement
The purpose of the active set update procedure is to update the active set of the connection between the UE and UTRAN. This procedure shall be used in CELL_DCH state. The UE should keep on using th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.15.3 Test purpose | To confirm that the UE performs HS-DSCH serving cell change from non DC-HSDPA capable cell to DC-HSDPA capable cell |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.15.4 Method of test | Initial Condition
System Simulator: 3 cells – Cell 1 non DC-HSDPA cell, Cell 2/3 DC HSDPA cell(s) with cell 2 (Anchor Carrier) and Cell 3 (Secondary Carrier)
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-17) under condition A17b, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE ca... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.15.5 Test requirements | At step 3 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At step 6 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set addition procedure, the change of serving cell to DC HSDPA.
At step 8 and st... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.16 Active set update: Dual Cell (DC) Activation by Serving Cell Change from DC-HSDPA capable cell to non DC-HSDPA capable cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.16.1 Definition and applicability | All UE categories which support Dual Cell HSDPA. UE supports F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.16.2 Conformance requirement | The purpose of the active set update procedure is to update the active set of the connection between the UE and UTRAN. This procedure shall be used in CELL_DCH state. The UE should keep on using the old RLs while configuring the new RLs. Also the UE should keep the transmitter turned on during the procedure. This proce... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.16.3 Test purpose | To confirm that the UE performs HS-DSCH serving cell change from DC-HSDPA capable cell to non DC –HSDPA capable cell |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.16.4 Method of test | Initial Condition
System Simulator: 3 cells – Cell 1 non DC-HSDPA cell, Cell 2/3 DC HSDPA cell(s) with cell 2 (Primary Carrier) and Cell 3 (Secondary Carrier)
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-17) under condition A25, as specified in clause 7.4 of TS 34.108.
The downlink transmission power is set according to val... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.16.5 Test requirements | At step 3 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At step 6 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the completion of the active set addition procedure and the change of serving cell.
At step 12 the UE should ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.17 Active Set Update in Soft Handover: Radio Link addition/removal and serving HS-DSCH / E-DCH cell change with simultaneous activation/deactivation of 64QAM and MIMO | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.17.1 Definition and applicability | UE category supports combined 64QAM and MIMO activation. UE support FDD and F-DPCH or Enhanced F-DPCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.17.2 Conformance requirement | If the UE receives an ACTIVE SET UPDATE, CELL UPDATE CONFIRM, or any reconfiguration message:
1> if the IE "MIMO parameters" is not included:
2> clear the MIMO_PARAMS variable;
2> trigger lower layers to stop operation in MIMO mode.
1> otherwise:
2> for FDD, if the IE "MIMO N_cqi_typeA/M_cqi ratio" is included:
3> stor... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.17.3 Test purpose | 1. To confirm that the UE starts 64QAM and MIMO reception according to the received ACTIVE SET UPDATE message.
2. To confirm that the UE maintains 64QAM and MIMO reception according to the received ACTIVE SET UPDATE message
3. To confirm that the UE stops 64QAM and MIMO reception according to the received ACTIVE SET UP... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.17.4 Method of test | Initial Condition
System Simulator: 3 cells – Cell 1: non 64QAM and MIMO cell, Cell 2: 64QAM and MIMO configured, Cell 3: 64QAM and MIMO configured
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-17) under condition A17b, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
- UE supports FDD
- UE category sup... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.17.5 Test requirements | At steps 3, 11, 16, 24, 29 the UE shall transmit a MEASUREMENT REPORT message on the uplink DCCH using AM RLC.
At steps 5, 13, 18 and 26, 31 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message on the uplink DCCH using AM RLC to acknowledge the previous ACTIVE SET UPDATE and indicate readiness to accept the new ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.18 Test procedure for enhanced serving HS-DSCH cell change: serving HS-DSCH / E-DCH cell change, with discontinuous uplink transmission and downlink reception | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.18.1 Definition and applicability | All UEs which support FDD,UL DTX,DPCCH Discontinuous Transmission and Target Cell Pre-Configuration. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.18.2 Conformance requirement | For the measurement, which triggered the MEASUREMENT REPORT message, the UE shall:
1> if the measurement report is triggered by intra frequency event 1d and the table "Target cell preconfigurations" in the variable TARGET_CELL_PRECONFIGURATION includes the Radio link that triggered the event:
2> if an "Activation time ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.18.3 Test purpose | 1. To confirm that the UE performs continuously monitoring on HS-SCCH when performing serving HS-DSCH cell change with target cell pre-configuration, with discontinuous uplink transmission and downlink reception according to the received ACTIVE SET UPDATE message.
2. To confirm that the UE performs discontinuous uplink... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.18.4 Method of test | Initial Condition
System Simulator: 2 cells - Cell 1 and cell 2 are active
UE: PS_DCCH+DTCH E_DCH/HS_DSCH (state 6-18) under condition A20, as specified in clause 7.4 of TS 34.108.
Related ICS/IXIT statement(s)
• UE supports FDD
• UE supports DPCCH Discontinuous Transmission
• UE supports target cell preconfiguration
T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.4.18.5 Test requirement | After step 2 the UE shall transmit a MEASUREMENT REPORT message with event 1A.
After step 4 the UE shall transmit an ACTIVE SET UPDATE COMPLETE message.
After step 7 the UE shall transmit a MEASUREMENT REPORT message with event 1D.
After step 10 the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message.... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.