hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.9.5.2 Conformance requirement | 1. The purpose of the inter-RAT cell reselection procedure from UTRAN is to transfer, under the control of the UE and to some extent the UTRAN, a connection between the UE and UTRAN to another radio access technology (e.g. GSM/GPRS).
2. This procedure is applicable in states CELL_FACH, CELL_PCH or URA_PCH.
When the UE ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.9.5.3 Test purpose | To verify that the UE performs reselection correctly considering the Qoffset value broadcast in SIB 11. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.9.5.4 Method of test | Initial conditions
System Simulator: 2 cells – Cell 1 is UTRAN FDD, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
The Inter-RAT Cell Info List of Cell 1 (UTRAN) refers t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.9.5.5 Test Requirements | In step g), the UE shall respond on Cell 2 and enter PACKET TRANSFER mode after performing the routing area update procedure.
In step h), the UE shall not respond in UTRAN cell.
8.3.9.5a Successful Cell Reselection with RAU – Qoffset value modification; UTRAN to GPRS (CELL_FACH), 1.28Mcps TDD
8.3.9.5a.1 Definition
8.3.... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.10 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11 Inter-RAT cell change order from UTRAN | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.1 Inter-RAT cell change order from UTRAN/To GPRS/CELL_DCH/Success with UEA1/UIA1, GEA3 ciphering | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.1.1 Definition | This test case verifies the UE behaviour in the scenario of interRAT cell change order from UTRAN to GERANincluding the UE capability to switch between different ciphering algorithms applied in each RAT: the UIA1/UEA1 are applied in the UTRAN cell, and, the GEA/3 is applied in the GERAN cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.1.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.1.3 Test purpose | To test that the UE shall be able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and perform a cell change to another RAT, even if no prior UE measurements have been performed on the target cell. The UE regards the procedure as completed when it has received a successful response from the target RA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.1.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
Cell 1- SIB 1 T309 set to 8 seconds (see specific message c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.1.5 Test requirement | During the procedure for bringing the UE into PS-DCCH+DTCH_DCH (State 6-10) in cell 1, the UE support for GEA/3 is checked in Attach Request/MS Network Capability; and, the UEA1 support is checked in RRC Connection Setup Complete/UE Radio Access Capability/Security Capability/Ciphering Algorithm Capability. Correct mes... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.2 Inter-RAT cell change order from UTRAN/To GPRS/CELL_FACH/Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.2.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.2.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.2.3 Test purpose | To test that the UE shall be able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_FACH state and perform a cell change to another RAT, even if no prior UE measurements have been performed on the target cell. The UE regards the procedure as completed when it has received a successful response from the target R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.2.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH+DTCH_FACH (state 6-11) in cell 1 as specified i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.2.5 Test requirement | After step 3 the UE shall transmit a CHANNEL REQUEST message on RACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.3 Inter-RAT cell change order from UTRAN/To GPRS/CELL_DCH/Failure (T309 expiry) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.3.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.3.2 Conformance requirement | If:
- timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
the UE shall:
1> if it received the CELL CHANGE ORDER FROM UTRAN me... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.3.3 Test purpose | To verify that when UE received CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and if the establishment of the connection to the other RAT failed due to expiry of timer T309 prior to the successful establishment of a connection to the target RAT:
a. revert back to the UTRA configuration;
b. establish the UTRA p... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.3.4 Method of test | Initial conditions
System Simulator: 3 cells - Cells 1 and 3 are UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH_DCH (State 6-7) in cell 1 as specified ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.3.5 Test requirement | In step 5 the UE shall transmit a CHANNEL REQUEST message on RACH.
In step 7 the SS shall receive CELL CHANGE ORDER FROM UTRAN FAILURE message on the old channel of the UTRAN cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.4 Inter-RAT cell change order from UTRAN/To GPRS/CELL_DCH/Failure (Physical channel Failure and Reversion Failure) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.4.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.4.2 Conformance requirement | If:
- timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
the UE shall:
1> if it received the CELL CHANGE ORDER FROM UTRAN me... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.4.3 Test purpose | To verify that when UE received CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
a. revert back to the UTRA configuration;
b. if the UE does not succeed in esta... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.4.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
SYSTEM INFORMATION BLOCK TYPE 1 (see specific message conte... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.4.5 Test requirement | In step 5 the UE shall transmit a CHANNEL REQUEST message on RACH.
In step 8 the SS shall receive CELL UPDATE message on the old channel of the UTRAN cell with the IE “Cell update cause” set to cause “ radio link failure “.
In step 11 the SS shall receive PHYSICAL CHANNEL COMPLETE message.
In step 12 the SS shall recei... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.5 Inter-RAT cell change order from UTRAN/To GPRS/CELL_FACH/Failure (T309 expiry) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.5.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.5.2 Conformance requirement | If:
- timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
the UE shall:
1> if the UE receives the CELL CHANGE ORDER FROM UTRA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.5.3 Test purpose | To verify that when UE received CELL CHANGE ORDER FROM UTRAN message in CELL_FACH state and if the establishment of the connection to the other RAT failed due to expiry of timer T309 prior to the successful establishment of a connection to the target RAT:
a. revert to the cell it was camped on at the reception of the C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.5.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH+DTCH_FACH (State 6-11) in cell 1 as specified i... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.5.5 Test requirement | In step 5 the UE shall transmit a CHANNEL REQUEST message on RACH.
In step 7 the SS shall receive CELL CHANGE ORDER FROM UTRAN FAILURE message on the old channel of the UTRAN cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.6 Inter-RAT cell change order from UTRAN/To GPRS/CELL_FACH/Failure (Physical channel Failure and Reversion Failure) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.6.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.6.2 Conformance requirement | If:
- timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
the UE shall:
1> if the UE receives the CELL CHANGE ORDER FROM UTRA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.6.3 Test purpose | To verify that when UE received CELL CHANGE ORDER FROM UTRAN message in CELL_FACH state and if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
a. revert to the cell it was camped on at the reception of the CELL CHANGE ORD... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.6.4 Method of test | Initial conditions
System Simulator: 3 cells - Cell 1, Cell 2 are UTRAN, Cell 3 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 3.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH+DTCH_FACH (State 6-11) in cell 1 as sp... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.6.5 Test requirement | In step 5 the UE shall transmit a CHANNEL REQUEST message on RACH.
In step 9 the SS shall receive CELL UPDATE message on the old channel of the UTRAN cell with the IE “Cell update cause” set to cause “ cell reselection “.
In step 11 the SS shall receive CELL CHANGE ORDER FROM UTRAN FAILURE message with the IE “ Inter-R... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.7 Inter-RAT cell change order from UTRAN/To GPRS/ Failure (Unsupported configuration) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.7.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.7.2 Conformance requirement | If the UTRAN instructs the UE to perform a non-supported cell change order scenario or to use a non-supported configuration, the UE shall:
1> transmit a CELL CHANGE ORDER FROM UTRAN FAILURE message, setting the information elements as specified below:
2> include the IE "RRC transaction identifier"; and
2> set it to the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.7.3 Test purpose | To verify if the UTRAN instructs the UE to perform a non-supported cell change order or to use a non-supported configuration, the UE shall:
a. Transmit a CELL CHANGE ORDER FROM UTRAN FAILURE message, setting the IE "Inter-RAT change failure" to "configuration unacceptable";
b. Resume normal operation |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.7.4 Method of test | Initial conditions
System Simulator : 1 UTRAN cell
UE : PS-DCCH+DTCH_DCH (State 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, one PS domain RAB is established.
Related ICS/IXIT statement
- UE supports both GSM/GPRS and UTRAN Radio Access Technologies,
- UE supports UTRAN interactive/ background UL: 64kbps, D... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.7.5 Test requirement | In step 3 the SS shall receive CELL CHANGE ORDER FROM UTRAN FAILURE message on the old channel of the UTRAN cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.8 Inter-RAT cell change order from UTRAN/To GPRS/ Failure (Invalid Inter-RAT message) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.8.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.8.2 Conformance requirement | If the CELL CHANGE ORDER FROM UTRAN message contains a protocol error causing the variable PROTOCOL_ERROR_REJECT to be set to TRUE according to clause 9, the UE shall perform procedure specific error handling as follows. The UE shall:
1> set the IE "RRC transaction identifier" in the CELL CHANGE ORDER FROM UTRAN FAILUR... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.8.3 Test purpose | To verify that the UE shall keep its old configuration and transmit a CELL CHANGE ORDER FROM UTRAN FAILURE message, with the "Inter-RAT change failure" set to "protocol error", when it receives a CELL CHANGE ORDER FROM UTRAN message, not including a valid message in accordance with the protocol specifications for the t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.8.4 Method of test | Initial conditions
System Simulator: 1 UTRAN cell
UE: PS-DCCH+DTCH_DCH (State 6-10) in cell 1 as specified in clause 7.4 of TS 34.108, one PS domain RAB is established.
Related ICS/IXIT statement
- UE supports both GSM/GPRS and UTRAN Radio Access Technologies,
- UE supports UTRAN interactive/ background UL: 64kbps, DL:... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.8.5 Test requirement | In step 3 the SS shall receive CELL CHANGE ORDER FROM UTRAN FAILURE message on the old channel of the UTRAN cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.9 Inter-RAT Cell Change Order from UTRAN to GPRS/CELL_DCH/Success (stop of HS-DSCH reception) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.9.1 Definition and applicability | All UEs which support FDD or TDD, HS-PDSCH and GSM. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.9.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.9.3 Test purpose | To test that the UE shall be able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state when Radio bearers are mapped to HSDSCH channels and perform a cell change to another RAT, even if no prior UE measurements have been performed on the target cell and HS-PDSCH channels are active. The UE regards the pr... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.9.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
Parameter
Unit
Cell 2
(GSM)
Qsearch_I (TDD)
dBm
15 (never)
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.9.5 Test requirements | After step 3 the UE shall transmit a CHANNEL REQUEST message on RACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.10 Inter-RAT Cell Change Order from UTRAN to GPRS/CELL_DCH/Failure (Physical channel Failure) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.10.1 Definition and applicability | All UEs which support FDD or TDD, HS-PDSCH and GSM. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.10.2 Conformance requirement | If:
- timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- if the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
the UE shall:
1> if it received the CELL CHANGE ORDER FROM UTRAN me... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.10.3 Test purpose | To verify that when UE received CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and if the establishment of the connection to the other RAT failed due to expiry of timer T309 prior to the successful establishment of a connection to the target RAT:
a. revert back to the UTRA configuration
b. establish the UTRA ph... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.10.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH+DTCH_DCH_HSDSCH (State 6-17) in cell 1 as speci... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.10.5 Test requirements | In step 5 the UE shall transmit a CHANNEL REQUEST message on RACH.
In step 7 the SS shall receive CELL CHANGE ORDER FROM UTRAN FAILURE message on the old channel of the UTRAN cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.11 Inter-RAT cell change order from UTRAN/To GPRS/CELL_FACH/No RAB established/Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.11.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.11.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.11.3 Test purpose | To test that the UE shall be able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_FACH state and perform a cell change to another RAT, when no RABs are established. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.11.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN and different location area, routing area.
UE: Registered Idle mode on PS in cell 1
Related ICS/IXIT statement
• UE ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.11.5 Test requirement | After step 4, the UE shall transmit a PACKET CHANNEL REQUEST message on PRACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.12 Inter-RAT cell change order from UTRAN/To GPRS/CELL_DCH/Network Assisted Cell Change/Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.12.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.12.2 Conformance requirement | 1> if the UE supports UTRAN to GERAN Network Assisted Cell Change, the IE "Geran-System Information" is present and the UE is in CELL_DCH state:
2> if according to [44] the IE "GERAN System Information" includes a correct and consistent set of SI or PSI messages:
3> use this information as the system information to beg... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.12.3 Test purpose | To test that the UE shall be able to receive a CELL CHANGE ORDER FROM UTRAN message which includes a correct and consistent set of SI or PSI messages in the IE "GERAN System Information" in CELL_DCH state and perform a cell change to another RAT using this as the system information to begin access on the target GERAN c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.12.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN. Cell 2 is GPRS, no System Information is broadcast on the BCCH. 51.010 clauses 20.22 and 40.1.1 Cell A parameters shall be referenced for the default parameters of cell 2.
Parameter
Unit
Cell 2
(GSM)
Qsearch_I (TDD)
dBm
15 (never)
All cells belong to the s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.12.5 Test requirement | After step 3 the UE shall transmit a CHANNEL REQUEST message on RACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.13 Inter-RAT cell change order from UTRAN/To GPRS/CELL_DCH/Network Assisted Cell Change with Invalid SI/Success | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.13.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.13.2 Conformance requirement | 1> if the UE supports UTRAN to GERAN Network Assisted Cell Change, the IE "Geran-System Information" is present and the UE is in CELL_DCH state:
2> if according to [44] the IE "GERAN System Information" includes a correct and consistent set of SI or PSI messages:
3> use this information as the system information to beg... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.13.3 Test purpose | To test that the UE shall be able to receive a CELL CHANGE ORDER FROM UTRAN message which includes an incorrect set of SI or PSI messages in the IE "GERAN System Information" in CELL_DCH state and perform a cell change to another RAT, ignoring the IE "GERAN System Information", even if no prior UE measurements have bee... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.13.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 Cell A parameters shall be referenced for the default parameters of cell 2 with the exception the SI_STATUS_IND bit in System Information Type 13 set to “1”.
Parameter
Unit
Cell 2
(GSM)
Qsearch_I (TDD)
dBm
15... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.13.5 Test requirement | After step 3 the UE shall transmit a CHANNEL REQUEST message on RACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.14 Inter-RAT Cell Change Order from UTRAN to GPRS/CELL_DCH/Success (stop of E-DCH transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.14.1 Definition and applicability | All UEs which support FDD and HS-PDSCH and E-DPDCH and GSM. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.14.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.14.3 Test purpose | To test that the UE is able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state when Radio bearers are mapped to the E-DCH channel and perform a cell change to another RAT, even if no prior UE measurements have been performed on the target cell and E-DPDCH or E-PUCH channels are active. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.14.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of Cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
Cell 1- SIB 1 T309 set to 8 seconds (see specific message c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.14.5 Test requirements | After step 3 the UE shall transmit a CHANNEL REQUEST message on RACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.15 Inter-RAT Cell Change Order from UTRAN to GPRS/CELL_DCH/Success (stop of discontinuous uplink transmission) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.15.1 Definition | All UEs, which support FDD and UL DTX. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.15.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.15.3 Test purpose | To test that the UE is able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state when Radio bearers are mapped to the E-DCH channel with UL DTX and DL DRX (if supported) configured and perform a cell change to another RAT, even if no prior UE measurements have been performed on the target cell and E-DPDC... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.15.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of Cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
Cell 1- SIB 1 T309 set to 8 seconds (see specific message c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.15.5 Test requirements | At step 4 the UE shall transmit a CHANNEL REQUEST message on RACH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.16 Inter-RAT Cell Change Order from UTRAN to GPRS/ MIMO (Success: with PCI Restrictions and S-CPICH Power Offset) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.16.1 Definition and applicability | All UE categories which support MIMO and GSM/GPRS
UE supports FDD and F-DPCH or Enhanced F-DPCH |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.16.2 Conformance requirement | The purpose of the inter-RAT cell change order procedure is to transfer, under the control of the network, a connection between the UE and UTRAN to another radio access technology (e.g. GSM). This procedure may be used in CELL_DCH and CELL_FACH state. This procedure may be used when no RABs are established or when the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.16.3 Test purpose | To test that the UE supporting MIMO (when S-CPICH Offset applied and PCI restricted by SS) is able to receive a CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and perform a cell change to another RAT, even if no prior UE measurements have been performed on the target cell. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.