hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.16.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of Cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
Cell 1- SIB 1 T309 set to 8 seconds (see specific message c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.16.5 Test requirements | At step 2, the UE shall transmit a RADIO BEARER SETUP COMPLETE message.
At step 3, UE shall transmit composite CQI/PCI reports of type A or type B. The SS shall check that for 500 consecutive CQI reports, 250 are type A and 250 of type B. PCI values of 0 or 3 shall be used by the UE for type A CQIs where one transport ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.17 Inter-RAT Cell Change Order from UTRAN to GPRS/MIMO for S-CPICH based MIMO with DPCH in STTD (Failure;physical channel failure) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.17.1 Definition and applicability | All UE categories which support MIMO
UE supports GSM/GPRS
UE supports FDD and F-DPCH or Enhanced F-DPCH |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.17.2 Conformance requirement | If:
- Timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- If the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
the UE shall:
1> if it received the CELL CHANGE ORDER FROM UTRAN me... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.17.3 Test Purpose | To verify that when MIMO configured(S-CPICH based MIMO with F-DPCH in STTD) UE received CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and if the establishment of the connection to the other RAT failed due to expiry of timer T309 prior to the successful establishment of a connection to the target RAT:
a. rever... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.17.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH DCH (state 6-7) as specified in clause 7.4 of T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.17.5 Test requirements | In step 2 the UE shall transmit a RADIO BEARER SETUP COMPLETE message
In step 3 the UE shall transmit composite CQI/PCI reports of type A or type B. The SS shall check that for 500 consecutive CQI reports, 250 are type A and 250 of type B. UE configures F-DPCH with Tx-diversity mode set to STTD.
In step 7 the UE shall ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.18 Inter-RAT Cell Change Order from UTRAN to GPRS/ MIMO (Failure; with PCI Restrictions and S-CPICH Power Offset) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.18.1 Definition and applicability | All UE categories which support MIMO and GSM/GPRS.
UE supports FDD and F-DPCH or Enhanced F-DPCH |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.18.2 Conformance requirement | If:
- Timer T309 expires prior to the successful establishment of a connection to the target RAT; or
- If the establishment of the connection to the other RAT failed due to other reasons e.g. (random) access failure, rejection due to lack of resources:
The UE shall:
1> if it received the CELL CHANGE ORDER FROM UTRAN me... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.18.3 Test purpose | To verify that when MIMO configured(with PCI Restrictions and S-CPICH Power Offset) UE received CELL CHANGE ORDER FROM UTRAN message in CELL_DCH state and if the establishment of the connection to the other RAT failed due to expiry of timer T309 prior to the successful establishment of a connection to the target RAT:
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.18.4 Method of test | Initial conditions
System Simulator: 2 cells - Cell 1 is UTRAN, Cell 2 is GPRS. 51.010 clauses 20.22 and 40.1.1 shall be referenced for the default parameters of cell 2.
All cells belong to the same PLMN. UTRAN and GPRS cells belong to different location area.
UE: PS-DCCH DCH (state 6-7) as specified in clause 7.4 of T... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.11.18.5 Test requirements | In step 2 the UE shall transmit a RADIO BEARER SETUP COMPLETE message
In step 3 the UE shall transmit composite CQI/PCI reports of type A or type B. The SS shall check that for 500 consecutive CQI reports, 250 are type A and 250 of type B. PCI values of 0 or 3 shall be used by the UE for type A CQIs where one transport... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12 Handover to CSG/Hybrid Cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.1 Inter-frequency inbound handover to UMTS CSG cell without reporting proximity indication | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.1.1 Definition | Test to verify the UE can report the Cell Identity, CSG ID and CSG membership indication of inter-frequency member CSG cells without reporting proximity indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.1.2 Conformance requirement | 1: Inter-frequency measurements for CSG/Hybrid cells:
For each cell reported in the IE "Cell measured results" of an inter-frequency Measurement Report, which is also included in the IE "Inter-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the system information of the concer... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.1.3 Test purpose | 1. To confirm that the UE can report the PSC of inter-frequency CSG cells and the PSC reported is within the range configured by the SRNC.
2. To confirm that the UE can report the Cell Identity, CSG ID and CSG membership indication of inter-frequency member CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.1.4 Method of test | Initial Condition
System Simulator:
2 cells – Cell 1 and Cell 4 are used.
The CSG id of the Cell4 is 2. Cell 1 does not broadcast CSG ID.
Cell1 is on f1.
Cell 4 is on f2.
The SIB3_REP of cell 4, i.e. SIB3 scheduling is 64.
User Equipment:
The UE Allowed CSG List contains CSG2.
The UE is PS-DCCH+DTCH_DCH (state 6-10) or... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.1.5 Test requirement | At step 4, the UE sends 2d event to the cell1.
At step 10, the UE sends 2c event to the cell1 for Cell 4.
At step 13, The UE sends a measurement reporting including the cell identity, CSG ID and CSG membership indication of the cell 4 within 4000ms.
At step 15, UE sends Physical Channel Reconfiguration Complete message... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.2 Inter-frequency inbound handover to UMTS CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.2.1 Definition | Test to verify the UE can report the Cell Identity, CSG ID and CSG membership indication of inter-frequency CSG cells with reporting proximity indication. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.2.2 Conformance requirement | 1: Inter-frequency measurements for CSG/Hybrid cells:
For each cell reported in the IE "Cell measured results" of an inter-frequency Measurement Report, which is also included in the IE "Inter-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the system information of the concer... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.2.3 Test purpose | 1. To confirm that the UE can report CSG proximity indication to the SRNC.
2. To confirm that the UE can report the Cell Identity, CSG ID and CSG membership indication of inter-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.2.4 Method of test | Initial Condition
System Simulator:
3 cells: Cell 1, cell 4 and cell5 are active.
The CSG id of the Cell4 is 2.
Cell 5 does not broadcast CSG ID.
The SIB3_REP of cell 4 SIB3 scheduling is 64.
User Equipment:
The UE Allowed CSG List contains CSG2.
The UE is PS-DCCH+DTCH_DCH (state 6-10) or CS-DCCH+DTCH_DCH (state 6-9) o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.2.5 Test requirement | At step 3, the UE sends CSG proximity indication to the cell1.
At step 9, the UE sends 2b event to the cell1.
At step 12, The UE sends a measurement reporting including the cell identity, CSG ID and CSG membership indication of the cell 4 within 4000ms.
At step 14, UE sends Physical Channel Reconfiguration Complete mes... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.3 Inter-frequency Measurements of UMTS CSG cell by non-member UE | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.3.1 Definition | Test to verify the UE can report the Cell Identity, CSG ID and CSG membership indication of a non-member CSG cell to the SRNC in the measurement report. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.3.2 Conformance requirement | 1: Inter-frequency measurements for CSG/Hybrid cells:
For each cell reported in the IE "Cell measured results" of an inter-frequency Measurement Report, which is also included in the IE "Inter-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the system information of the concer... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.3.3 Test purpose | 1. To confirm that the UE can report the measurement report with non-member indication of the CSG cells to the SRNC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.3.4 Method of test | Initial Condition
System Simulator:
2cells: Cell 1, cell 4 are used.
The CSG id of the Cell4 is 2. Cell 1 does not broadcast CSG ID.
The SIB3_REP of cell 4, i.e., SIB3 scheduling is 64.
User Equipment:
The UE Allowed CSG List does not contain CSG2.
The UE is PS-DCCH+DTCH_DCH (state 6-10) or CS-DCCH+DTCH_DCH (state 6-9)... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.3.5 Test requirement | At step 7, the UE sends 2b event for cell 4 to cell1.
At step 10, The UE sends a measurement reporting including the cell identity, CSG ID and CSG membership(non-member) indication (which should be absent) of the cell 4 within 4000ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.4 Intra-frequency inbound handover to UMTS CSG cell without specifying PSCs for SI Acquisition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.4.1 Definition | Test to verify the UE can report the PSC, Cell Identity, CSG ID and CSG membership indication of intra-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.4.2 Conformance requirement | 1.Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.4.3 Test purpose | 1. To confirm that the UE can report the PSC of intra-frequency CSG cells.
2. To confirm that the UE can report the Cell Identity, CSG ID and CSG membership indication of intra-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.4.4 Method of test | Initial Condition
System Simulator:
2 cells: Cell 1 and Cell 2 are used.
Cell1 is active. Cell 1 does not broadcast CSG ID.
Cell2 is a CSG cell.
The CSG indicator of the cell2 is set to TRUE.
The CSG id of the Cell2 is 2.
The PSC of the cell 2 is 144.
User Equipment:
The UE Allowed CSG List contains CSG2.
The UE is PS-... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.4.5 Test requirement | At step 4, the UE sends CSG proximity indication to the cell1.
At step 7, the UE sends 1d event to the cell1 including the psc, cell identity, CSG ID and CSG membership indication of the cell 2.
At step 10, the UE sends Active Set Update Complete message on uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.5 Intra-frequency inbound handover to UMTS CSG cell without reporting proximity indication | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.5.1 Definition | Test to verify the UE can report Cell Identity, CSG ID and CSG membership indication of intra-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.5.2 Conformance requirement | 1.Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.5.3 Test purpose | 1. To confirm that the UE considers CSG Set as the monitored set for measurement and measurement reporting procedures of intra-frequency CSG cells.
2. To confirm that the UE can report the Cell Identity, CSG ID and CSG membership indication of intra-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.5.4 Method of test | Initial Condition
System Simulator:
2 cells: Cell 1 and Cell 2 are used.
Cell1 is active. Cell1 does not broadcast CSG ID.
Cell2 is a CSG cell.
The “CSG Indicator” in MIB of the cell2 is set to TRUE.
The “CSG Identity” in SIB3 of the Cell2 is 2. “CSG PSC Split Information” is also included in SIB3 with “Start PSC” set... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.5.5 Test requirement | At step 4, the UE sends event 1d with the information of the cell2.
At step 7, the UE sends cell identity, CSG ID and CSG membership indication of the cell2 within 4000 ms.
At step 9, the UE sends Physical Channel Reconfiguration Complete on uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.6 Intra-frequency inbound handover to UMTS CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.6.1 Definition | Test to verify the UE can report the Cell Identity, CSG ID and CSG membership indication of intra-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.6.2 Conformance requirement | 1：Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.6.3 Test purpose | 1. To confirm that the UE can report an "entering" CSG proximity indication as the SRNC configured
2. To confirm that the UE can report the PSC of intra-frequency CSG cells.
3. To confirm that the UE can report the Cell Identity, CSG ID and CSG membership indication of intra-frequency CSG cells. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.6.4 Method of test | Initial Condition
System Simulator:
2 cells: Cell 1 and Cell 2 are used.
Cell1 is active. Cell1 does not broadcast CSG ID.
Cell2 is a CSG cell.
The CSG indicator of the cell2 is set to TRUE.
The CSG id of the Cell2 is 2.
The PSC of the cell 2 is 144.
User Equipment:
The UE Allowed CSG List contains CSG2.
The UE is PS-D... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.6.6 Test requirement | At step 4, the UE sends CSG proximity indication to the SS.
At step 7, the UE sends 1d event to the SS including the PSC of the cell 2.
At step 10, the UE sends the cell identity, CSG ID and CSG membership indication of the cell 2 to the SS.
At step 13, the UE sends Active Set Update Complete message on uplink DCCH usi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.7 Intra-frequency Measurements for UMTS CSG Cell for Non-member UE | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.7.1 Definition | Test to verify that the UE can report the CSG ID and Cell Identity of the not-allowed intra-frequency CSG cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.7.2 Conformance requirement | 1. Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.7.3 Test purpose | 1. To confirm that the UE considers CSG Set as the monitored set for measurement and measurement reporting procedures of intra-frequency CSG cells.
2. To verify that the UE could report the Cell Identity and CSG ID of the not-allowed intra-frequency CSG cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.7.4 Method of test | Initial conditions
System Simulator
2 cells: Cell 1 and 2 are active.
Cell 1 does not broadcast CSG ID.
Cell2 is a CSG cell.
The “CSG Indicator” in MIB of the cell2 is set to TRUE.
Cell 2 is a CSG HNB cell with the CSG ID of CSG 1. “CSG PSC Split Information” is also included in SIB3 with “Start PSC” set to 144 and “Nu... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.7.5 Test Requirements | At step 4, the UE shall send a MEASUREMENT REPORT message including the measured PSC for cell 2 and event 1D.
At step 6, the UE shall send a MEASUREMENT REPORT message including the cell identity and CSG ID of the cell 2 within 4000 msec. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.8 Intra-frequency Inbound Handover to UMTS Hybrid Cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.8.1 Definition | Test to verify that the UE can report the CSG ID, Cell Identity and CSG membership indication of the intra-frequency hybrid cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.8.2 Conformance requirement | 1. Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.8.3 Test purpose | 1. To confirm that the UE considers CSG Set as the monitored set for measurement and measurement reporting procedures of intra-frequency CSG cells.
2. To verify that the member UE could report the Cell Identity, CSG ID and CSG membership indication of the intra-frequency hybrid cell and handover to it. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.8.4 Method of test | Initial conditions
System Simulator
2 cells: Cell 1 and 2 are active.
Cell 1 does not broadcast CSG ID.
Cell 2 is a hybrid cell with the CSG ID of CSG 2. “CSG PSC Split Information” is also included in SIB3 with “Start PSC” set to 144 and “Number of PSCs” set to 10.
The Primary Scrambling Code of Cell 2 is 150.
The SIB... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.8.5 Test Requirements | Same test requirement as in clause 8.3.12.5. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.9 Intra-frequency Inbound Handover to UMTS Hybrid Cell for Non-member UE | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.9.1 Definition | Test to verify that the non-member UE can report the CSG ID and Cell Identity of the intra-frequency hybrid cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.9.2 Conformance requirement | 1. Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.9.3 Test purpose | 1. To confirm that the UE considers CSG Set as the monitored set for measurement and measurement reporting procedures of intra-frequency CSG cells.
2. To verify that the non-member UE could report the Cell Identity and CSG ID of the intra-frequency hybrid cell and handover to it.. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.9.4 Method of test | Initial conditions
System Simulator
2 cells: Cell 1 and 2 are active.
Cell 1 does not broadcast CSG ID.
Cell 2 is a hybrid cell with the CSG ID of CSG 1. “CSG PSC Split Information” is also included in SIB3 with “Start PSC” set to 144 and “Number of PSCs” set to 10.
The Primary Scrambling Code of Cell 2 is 150.
The Cel... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.9.5 Test Requirements | At step 4, the UE shall send a MEASUREMENT REPORT message including the measured PSC for cell 2 and event 1D.
At step 6, the UE shall send a MEASUREMENT REPORT message including the cell identity and CSG ID of the cell 2 within 4000 msec.
At step 8, the UE shall send Physical Channel Reconfiguration Complete message on... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.10 Intra-frequency inbound handover to UMTS non-CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.10.1 Definition | Test to verify the UE can report the Cell Identity of the non-CSG cell, but “CSG Identity” and “CSG Member Indication” IEs are not included. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.10.2 Conformance requirement | 1. Intra-frequency measurements for CSG/Hybrid cells
For each cell reported in the IE "Cell measured results" of an intra-frequency Measurement Report, which is also included in the IE "Intra-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the valid system information of the c... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.10.3 Test purpose | 1. To confirm that the UE can measure and report the Cell Identity of the non-CSG cell. The CSG Identity and CSG Member indication are not included in the measurement report.
2. To confirm that the SRNC can request SI acquisition and reporting for non-CSG cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.10.4 Method of test | Initial Condition
System Simulator:
2 cells: Cell 1 and Cell 2 are on f1.
Cell1 and Cell2 does not broadcast CSG ID..
User Equipment:
The UE is PS-DCCH+DTCH_DCH (state 6-10) or CS-DCCH+DTCH_DCH (state 6-9) or PS+CS-DCCH+DTCH_DCH (state 6-14) as specified in clause 7.4 of TS 34.108, depending on the CN domain(s) support... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.10.5 Test requirement | 1. At step 4, the UE reports the PSC of the cell2.
2. At step 7, the UE reports the Cell Identity of the cell2 within 4000msec.
3. At step 9, the UE sends Physical Channel Reconfiguration Complete message on uplink DCCH using AM RLC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.11 Inter-frequency Measurement of UMTS non-CSG cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.11.1 Definition | Test to verify the UE can report the Cell Identity and does not report CSG ID and CSG Member indication of a non-CSG cell to the SRNC in the measurement report. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.11.2 Conformance requirement | 1: Inter-frequency measurements for CSG/Hybrid cells:
For each cell reported in the IE "Cell measured results" of an inter-frequency Measurement Report, which is also included in the IE "Inter-frequency SI Acquisition" associated with the measurement:
1> if the UE managed to acquire the system information of the concer... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.11.3 Test purpose | 1. To confirm that the UE can read and report system information of a non-CSG cell to the SRNC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.11.4 Method of test | Initial Condition
System Simulator:
2 cells: Cell 1, cell 4 are used.
Cell4 and Cell 1 do not broadcast CSG ID.
Cell1 is on f1.
Cell 4 is on f2
The SIB3_REP of cell 4, i.e., SIB3 scheduling is 64.
User Equipment:
The UE Allowed CSG List is empty.
The UE is PS-DCCH+DTCH_DCH (state 6-10) or CS-DCCH+DTCH_DCH (state 6-9)... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.11.5 Test requirement | At step 7, the UE sends 2b event for cell 4 to the cell1.
At step 10, The UE sends a measurement reporting including the cell identity but not including CSG ID and CSG membership indication of the cell 4 within 4000ms. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.12 Membership checking for handover to the CSG Cell | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.12.1 Definition | Test to verify the UE can check whether a Cell is a CSG member Cell according to the CSG id and ePLMN identity and to verify the UE can report the Cell Identity, CSG ID and CSG membership indication to the SRNC. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.12.2 Conformance requirement | 1: Definitions
For the purposes of the present document, the terms and definitions given in [1] apply, together as:
Activated uplink frequency (FDD only): For a specific UE, an uplink frequency is said to be activated if the UE is allowed to transmit on that frequency. The primary uplink frequency is always activated w... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.12.3 Test purpose | 1. To confirm that the UE is considered as "member" when the CSG whitelist of the UE includes an entry comprising of Cell’s CSG ID and the EPLMN identity.
2. To verify that the member UE could report the Cell Identity, CSG ID and CSG membership indication of the CSG member Cell and handover to it. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.12.4 Method of test | Initial conditions
2 Cells: Cell 1 and Cell 2.
Cell 1 does not broadcast CSG ID.
Cell 1 belongs to PLMN 1
Cell 2 is a CSG Cell with the CSG ID of CSG 2. “CSG PSC Split Information” is also included in SIB3 with “Start PSC” set to 144 and “Number of PSCs” set to 10.
The Primary Scrambling Code of Cell 2 is 150.
Cell 2 b... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.12.5 Test requirement | At step 1, The SS waits for random access requests from the UE. A complete Location Update is done.
At step 4, the UE sends event 1d with the information of the Cell2.
At step 7, the UE sends Cell identity, CSG ID and CSG membership indication of the Cell2 within 4000 msec.
At step 9, the UE sends Physical Channel Reco... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.13 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.14 Inter-frequency CSG proximity indication | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.14.1 Definition | Test to verify the UE properly indicates that the UE is entering or leaving the proximity of one or more CSG member cells based on proximity detection with an autonomous search function. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.14.2 Conformance requirement | 1: The UE shall initiate transmission of the ProximityIndication message with "entering" according to [16] within [6] minutes after entering the proximity of one or more CSG member cell(s) on a UTRA or E-UTRA frequency.
The UE shall initiate transmission of the ProximityIndication message with "leaving" according to [1... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.14.3 Test purpose | 1. To confirm that the UE can transmit ProximityIndication message with "entering" after entering the proximity of CSG member cell.
2. To confirm that the UE can transmit ProximityIndication message with "leaving" after leaving the proximity of CSG member cell. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.14.4 Method of test | Initial Condition
System Simulator:
3 cells – Cell 1, Cell 2 and Cell 4 are used.
The CSG id of the Cell 4 is 2. Cell 1 and 2 do not broadcast CSG ID.
Cell 1 and Cell 2 are on f1.
Cell 4 is on f2.
The SIB3_REP of cell 4 i.e. SIB3 scheduling is 64.
User Equipment:
The UE Allowed CSG List shall be empty.
The UE memory sh... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.3.12.14.5 Test requirement | At step 8, the UE sends a measurement report including “entering” proximity of a CSG member cell within [360]s.
At step 11, the UE sends a measurement report including “leaving” proximity of a CSG member cell within [360]s.
8.4 Measurement procedure |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.4.1 Measurement Control and Report | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.4.1.1 Measurement Control and Report: Intra-frequency measurement for transition from idle mode to CELL_DCH state (FDD) | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.4.1.1.1 Definition | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.4.1.1.2 Conformance requirement | Upon transition from idle mode to CELL_DCH state:
1> if intra-frequency measurements applicable to CELL_DCH state are stored in the variable MEASUREMENT_IDENTITY:
2> if the cell in which the UE transited from idle mode is included in the active set for the CELL_DCH state, the UE shall:
3> begin measurement reporting.
2... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.4.1.1.3 Test Purpose | 1. To confirm that the UE continues to monitor intra-frequency measurement quantity of the cells listed in System Information Block type 11 or 12 messages, after it has entered CELL_DCH state from idle mode. When the intra-frequency measurement reporting criteria specified in System Information Block type 11 or 12 mess... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.4.1.1.4 Method of test | Initial Condition
System Simulator: 3 cells – Cell 1, Cell 2 and Cell 3 are active.
UE: "Registered idle mode on CS" (state 2) or "Registered idle mode on PS" (state 3) in cell 1 as specified in clause 7.4 of TS 34.108, depending on the CN domain supported by the UE If the UE supports both CS and PS domains, the initia... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.