hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.2.4 Method of test | Initial condition
System Simulator:
1 MBMS cell
User Equipment:
The UE is in CELL_PCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service application avai... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.2.5 Test requirements | At step 2, the UE shall initiate a cell update procedure for MBMS ptp radio bearer request.
8.5.1.2m MBMS PTP Session Start at MCCH Notification in CELL_PCH / MBMS Multicast Service
8.5.1.2m.1 Definition
This test is applicable for all UEs that support MBMS multicast services.
8.5.1.2m.2 Conformance requirement
Same co... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.3 MBMS PTM Session Start at MCCH Acquisition in CELL_FACH state / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.3.1 Definition and applicability | This test case is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.3.2 Conformance requirement | If the variable MBMS_ACTIVATED_services is not empty, the UE shall apply the MCCH acquisition procedure upon selecting (e.g. upon power on) or re-selecting a cell supporting MBMS, upon change of MBMS controlling cell (e.g. due to an active set update or hard handover), upon entering UTRA from another RAT, upon release ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.3.3 Test purpose | 1. To verify that the UE receives the MBMS information on MCCH in CELL_FACH state.
2. To verify that the UE correctly handles the notification procedure after receiving the MBMS MODIFIED SERVICES INFORMATION message via MCCH if no ongoing MBMS p-t-m session (MICH supported/not supported by the UE).
3. To verify that th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.3.4 Method of test | Initial Condition
System Simulator:
2 MBMS cells, Cell 21 and Cell 22.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statement(s)
- MBMS Broadca... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.3.5 Test requirement | After step 9, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the number of reported RLC SDUs shall be greater than zero.
8.5.1.3m MBMS PTM Session Start at MCCH Acquisition in CELL_FACH state / MBMS Multicast Service
8.5.1.3m.1 Definition
This test is applicable for all UEs that suppo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.4 MBMS PTM Session Start at MCCH Notification in CELL_DCH state / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.4.1 Definition | This test case is applicable for all UEs that support MBMS broadcast services and support MBMS p-t-m reception in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.4.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3 o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.4.3 Test purpose | 1 To verify that the UE handles reading of MCCH during compressed mode measurements in CELL_DCH state if the UE requires compressed mode.
2. To verify that the UE correctly handles the notification procedure after receiving the MBMS MODIFIED SERVICES INFORMATION message via MCCH in CELL_DCH state.
3. To verify that th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.4.4 Method of test | Initial Condition
System Simulator:
2 MBMS cells, Cell 21 and Cell 24
User Equipment:
The UE is in CELL_DCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statement(s)
- MBMS Broadcast... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.4.5 Test requirement | After step 3, if compression is required, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message.
After step 11, the UE shall transmit a MEASUREMENT REPORT message with cell 24 as the reported cell. After step 13, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the n... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.5 MBMS PTM Session Start at MCCH Acquisition in CELL_DCH (for a non-MBMS service) when entering into an MBMS cell (UE capable of MBMS p-t-m reception in CELL_DCH) / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.5.1 Definition and applicability | This test case is applicable for all UEs that support MBMS broadcast services and support MBMS p-t-m reception in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.5.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3 o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.5.3 Test purpose | 1. To verify that the UE receives the MBMS information on MCCH in CELL_DCH state.
2. To verify that the UE, when entering into an MBMS cell in CELL_DCH state, starts the p-t-m reception of MBMS services according to the information on MCCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.5.4 Method of test | Initial Condition
System Simulator:
2 MBMS cells, Cell 21 and Cell 24.
User Equipment:
The UE is in CELL_DCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statement(s)
- MBMS Broadcast s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.5.5 Test requirement | After step 4, the UE shall transmit a PHYSICAL CHANNEL RECONFIGURATION COMPLETE message in cell 24.
After step 10, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the number of reported RLC SDUs shall be greater than zero.
8.5.1.5m MBMS PTM Session Start at MCCH Acquisition in CELL_DCH... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.6 Void | 8.5.1.6m Void |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.7 Void | 8.5.1.7m Void |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.8 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.9 MBMS PTM Session Start at MCCH Notification in Idle Mode / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.9.1 Definition and applicability | This test case is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.9.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3.
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.9.3 Test purpose | 1. To verify that the UE receives the MBMS information on MCCH in Idle Mode.
2. To verify that the UE correctly handles the notification procedure after receiving the MBMS MODIFIED SERVICES INFORMATION message via MCCH if no ongoing MBMS p-t-m session (MICH supported/not supported by the UE).
3. To verify that the UE s... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.9.4 Method of test | Initial Condition
System Simulator:
- 1 MBMS cell.
User Equipment:
- The UE is in Idle mode as specified in clause 7.6 of TS 34.108.
- The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statement(s)
- MBMS Broadcast service application... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.9.5 Test requirement | After step 38, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the number of reported RLC SDUs shall be greater than zero.
8.5.1.9m MBMS PTM Session Start at MCCH Notification in Idle Mode / MBMS Multicast Service
8.5.1.9m.1 Definition
This test is applicable for all UEs that support M... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.10 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.11 MBMS PTP Session Start at MCCH Notification in Idle Mode / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.11.1 Definition | This test is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.11.2 Conformance requirement | If the IE "MBMS required UE action" is included and concerns an MBMS activated service the UE shall:
…
1> if the IE "MBMS required UE action" is set to 'Request PTP RB':
2> if the UE is in idle mode:
3> indicate to upper layers that establishment of a PS signalling connection is required to receive the concerned MBMS [... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.11.3 Test purpose | To verify that the UE receives the MBMS info in idle mode state and correctly triggers the P-t-p request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.11.4 Method of test | Initial condition
System Simulator:
1 MBMS cell
User Equipment:
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in the MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service application avail... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.11.1.5 Test requirements | At step 2, the UE shall transmit a RRC CONNECTION REQUEST message with Establishment cause set to “MBMS ptp RB request”. The UE shall include the IE "MBMS Selected Service ID" within the IE "MBMS Selected Services Short" and the IE "MBMS Modification Period identity".
8.5.1.11m MBMS PTP Session Start at MCCH Notificati... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.12 MBMS PTP Session Start at MCCH Notification in URA_PCH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.12.1 Definition | This test is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.12.2 Conformance requirement | The MBMS notification procedure is used by the UE to respond to a notification provided by UTRAN, indicating a change applicable for one or more MBMS services the UE has joined. The procedure applies to all UEs supporting MBMS, irrespective of their state (idle and connected mode: URA_PCH, CELL_PCH, CELL_FACH and CELL_... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.12.3 Test purpose | To verify that the UE receives the MBMS info in URA_PCH state and correctly triggers the P-t-p request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.12.4 Method of test | Initial condition
System Simulator:
1 MBMS cell.
User Equipment:
The UE is in URA_PCH state as specified in clause 7.6 of TS 34.108
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service application avail... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.12.5 Test requirements | At step 2, the UE shall initiate a cell update procedure for MBMS ptp radio bearer request. The UE shall include in the transmitted CELL_UPDATE message the IE "MBMS Selected Service ID" within the IE "MBMS Selected Services Short" and the IE "MBMS Modification Period identity" in case of MBMS Selected service.
8.5.1.12... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.13 MBMS PTP Session Start at MCCH Notification in CELL_FACH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.13.1 Definition | This test is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.13.2 Conformance requirement | The MBMS notification procedure is used by the UE to respond to a notification provided by UTRAN, indicating a change applicable for one or more MBMS services the UE has joined. The procedure applies to all UEs supporting MBMS, irrespective of their state (idle and connected mode: URA_PCH, CELL_PCH, CELL_FACH and CELL_... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.13.3 Test purpose | To verify that the UE receives the MBMS info in Cell_FACH state and correctly triggers the P-t-p request procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.13.4 Method of test | Initial condition
System Simulator:
1 MBMS cell.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service application av... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.13.5 Test requirements | At step 2, the UE shall initiate a cell update procedure for MBMS ptp radio bearer request. The UE shall include in the transmitted CELL_UPDATE message the IE "MBMS Selected Service ID" within the IE "MBMS Selected Services Short" and the IE "MBMS Modification Period identity" in case of MBMS Selected service.
8.5.1.13... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.14 MBMS PTM Session Start at MCCH Acquisition / MBSFN mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.14.1 Definition | This test is applicable for UEs that support MBMS broadcast services in MBSFN mode and which support either both transmit and receive functions or MBSFN receive only function. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.14.2 Conformance requirement | The UE applies the MCCH acquisition procedure to determine the MBMS services available in the cell and to initiate reception of the services that the UE has activated. The procedure applies to all UEs supporting MBMS, irrespective of their state (idle, URA_PCH, CELL_PCH, CELL_FACH and CELL_DCH).
For 1.28 Mcps TDD, if t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.14.3 Test purpose | 1. To verify that the UE acquires the MBMS information on MCCH after selecting the MBSFN cluster.
2. To verify that the UE, after acquiring the MBMS information on MCCH, starts the p-t-m reception of MBMS services according to the information on MCCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.14.4 Method of test | Initial condition
System Simulator:
- MBSFN carrier: 2 cells, Cell 31 (PLMN1) and Cell 33 (PLMN1). Cell 33 is powered off. In addition to broadcasting System Information, MCCH messages are transmitted by the SS on Cell 31 using MBMS configuration C1 and Default1 MCCH scheduling (No ongoing session) according to subcla... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.14.5 Test requirements | 1) After step 12, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number > 0 for Cell 33 MTCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.15 MBMS PTM Session Start at MCCH Notification / MBSFN mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.15.1 Definition | This test is applicable for UEs that support MBMS broadcast services in MBSFN mode and which support either both transmit and receive functions or MBSFN receive only function. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.15.2 Conformance requirement | The UE applies the MCCH acquisition procedure to determine the MBMS services available in the cell and to initiate reception of the services that the UE has activated. The procedure applies to all UEs supporting MBMS, irrespective of their state (idle, URA_PCH, CELL_PCH, CELL_FACH and CELL_DCH).
For 1.28 Mcps TDD, if t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.15.3 Test purpose | 1. To verify that the UE receives updated MBMS information on MCCH of the MBSFN cluster.
2. To verify that the UE correctly handles the notification procedure after receiving the MBMS MODIFIED SERVICES INFORMATION message via MCCH if there is no ongoing MBMS p-t-m session (MICH supported/not supported by the UE).
3. To... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.15.4 Method of test | Initial condition
System Simulator:
- MBSFN carrier: 1 cell, Cell 31 (PLMN1). In addition to broadcasting System Information, MCCH messages are transmitted by the SS on Cell 31 using MBMS configuration C1 and Default1 MCCH scheduling (No ongoing session) according to subclause 11.2 of TS 34.108.
- Unicast carrier : 1 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.1.15.5 Test requirements | At step 7 the UE shall send a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE with a RLC SDU counter value greater than zero.
At step 12 the UE shall send a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE with a RLC SDU counter value greater than the reported value at previous sub-test.
NOTE: For UE in UE test loop mode 3 th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2 MBMS Session Reconfiguration | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.1 MBMS PTP Session Reconfiguration – Change of Activated Service / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.1.1 Definition | This test is applicable for all UEs that support MBMS broadcast services and MBMS service change for a ptp RB and capable of reading MCCH in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.1.2 Conformance requirement | If the UE has included the IE "Support of MBMS service change for a ptp RB" in a previous MBMS MODIFICATION REQUEST message and if the IE "RAB information for MBMS ptp bearer" is included then the UE shall:
1> if an entry for the radio access bearer identified by the IE "RB Identity" already exists in the variable ESTA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.1.3 Test purpose | To verify that the UE in Cell_DCH, stops the reception of an MBMS service and starts the reception of a new MBMS service. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.1.4 Method of test | Initial condition
System Simulator:
2 MBMS cells, Cell 21 and Cell 24
User Equipment:
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
The UE has selected the broadcast service to be provided by the SS (MBMS Selected Services: Service_1 included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT stat... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.1.5 Test requirements | At step 4, the UE shall transmit a RRC CONNECTION REQUEST message with Establishment cause set to “MBMS reception” and with the IE “MBMS Selected Service ID” within the IE “MBMS Selected Services Short” and the IE “MBMS Modification Period identity”.
After step 6, the UE shall transmit a RADIO BEARER SETUP COMPLETE mes... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.2 MBMS PTM Session Reconfiguration – Transfer Mode Change to PTP / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.2.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.2.2 Conformance requirement | The UE shall:
1> if in idle mode, URA_PCH, CELL_PCH or CELL_FACH state:
2> if receiving an MBMS service that is provided via a p-t-m radio bearer; or
2> if not receiving an MBMS service that is provided via a p-t-m radio bearer and not monitoring MICH:
3> acquire the MBMS MODIFIED SERVICES INFORMATION message from MCCH... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.2.3 Test purpose | To verify UE correctly handles the transfer mode change from MBMS PTM RB to MBMS PTP RB. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.2.4 Method of test | Initial condition
System Simulator:
1 MBMS cell, Cell 21
User Equipment:
The UE is in Cell_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service applic... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.2.5 Test requirements | At step 11, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the number of reported RLC SDUs shall be greater than zero.
At step 14, the UE shall send a CELL UPDATE message with Cell update cause set to “MBMS ptp RB request”.
At step 19, the UE shall transmit RADIO BEARER SETUP COMPLETE... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.3 MBMS PTP Session Reconfiguration - Transfer mode change to PTM / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.3.1 Definition | This test is applicable for all UEs that support MBMS broadcast services and capable of reading MCCH in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.3.2 Conformance requirement | If the variable MBMS_ACTIVATED_services is not empty, the UE shall apply the MCCH acquisition procedure upon selecting (e.g. upon power on) or re- selecting a cell supporting MBMS, upon change of MBMS controlling cell (e.g. due to an active set update or hard handover), upon entering UTRA from another RAT, upon release... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.3.3 Test purpose | To verify that the UE shall apply the MCCH acquisition procedure upon release of a MBMS PTP RB for the purpose of changing transfer mode. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.3.4 Method of test | Initial condition
System Simulator: 1 MBMS cell, Cell 21.
User Equipment:
The UE has a valid IMSI.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
Related ICS/IXIT statements
- MBMS Broa... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.3.5 Test requirements | At step 6, the UE shall send a RRC CONNECTION SETUP COMPLETE message.
At step 11, the UE shall send a RADIO BEARER SETUP COMPLETE message.
At step 14, the UE shall send a RADIO BEARER RELEASE COMPLETE message.
At step 28, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the number of re... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.4 MBMS PTM Session Reconfiguration – MTCH data rate change / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.4.1 Definition and applicability | This test case is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.4.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3.
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.4.3 Test purpose | To verify that the UE shall receive the MBMS notification information while receiving an ongoing MBMS service via a p-t-m radio bearer, and apply the new p-t-m radio bearer configuration. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.4.4 Method of test | Initial Condition
System Simulator:
1 MBMS cell.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statement(s)
- MBMS Broadcast service application... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.4.5 Test requirement | At step 9 the UE shall send a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE with a RLC SDU counter value greater than zero.
At step 14 the UE shall send a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE with a RLC SDU counter value greater than the reported value at previous sub-test.
Note For UE in UE test loop mode 3 the... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.5 MBMS PTM Session Reconfiguration - MTCH Data Rate Change / MBSFN mode | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.5.1 Definition | This test is applicable for UEs that support MBMS broadcast services in MBSFN mode and which support either both transmit and receive functions or MBSFN receive only function. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.5.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3.
... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.5.3 Test purpose | To verify that the UE receives the MBMS notification information while receiving an ongoing MBMS service via a p-t-m radio bearer, and applies the new p-t-m radio bearer configuration. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.5.4 Method of test | Initial condition
System Simulator:
- MBSFN carrier: 1 cell, Cell 31 (PLMN1). In addition to broadcasting System Information, MCCH messages are transmitted by the SS on Cell 31 using MBMS configuration C1 and Default1 MCCH scheduling (No ongoing session) according to subclause 11.2 of TS 34.108.
- Unicast carrier : 1 ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.2.5.5 Test requirements | 1) After step 9, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number > 0 for the service/session activated on the Cell 33 MTCH.
1) After step 14, the UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message shall report a number > 0 for the service/session activated on the Cell 33 MTCH. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3 MBMS Frequency Layer Convergence and Dispersion | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.1 MBMS Session Start (Frequency Layer Convergence)/Session Stop (Frequency Layer Dispersion) in Idle mode / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.1.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services.
8.5.3.1.2 Conformance requirement
The UE shall perform the MBMS frequency layer selection procedure upon receiving the IE "MBMS Preferred frequency information" or when specified explicitly e.g. as in subclause 8.6.9.2, or when the priority for an... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.1.3 Test purpose | To verify that in idle mode, the UE at session start, re-selects to the preferred Frequency Layer for the MBMS services it has activated.
To verify that at session stop the UE re-selects to the frequency where it has previously camped. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.1.4 Method of test | Initial condition
System Simulator:
2 MBMS (Cell 21, Cell 24).
User Equipment:
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service appli... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.1.1.5 Test requirements | At step 8, the UE shall send an RRC CONNECTION REQUEST message on Cell 24 with Establishment cause set to “MBMS reception”.
At step 21, the test result of C.1 shall indicate that the UE is in idle mode on Cell 21.
8.5.3.1m MBMS Session Start (Frequency Layer Convergence)/Session Stop (Frequency Layer Dispersion) in Idl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.2 MBMS Session Start (Frequency Layer Convergence)/Session Stop (Frequency Layer Dispersion) in CELL_PCH / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.2.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services.
8.5.3.2.2 Conformance requirement
The UE shall perform the MBMS frequency layer selection procedure upon receiving the IE "MBMS Preferred frequency information", when specified explicitly e.g. as in subclause 8.6.9.2, or when the preferred MBMS se... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.2.3 Test purpose | To verify that in CELL_PCH, the UE at session start re-selects to the preferred Frequency Layer for the MBMS services it has activated.
To verify that at session stop the UE re-select to the frequency where it has previously camped. |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.