hash stringlengths 32 32 | doc_id stringlengths 5 12 | section stringlengths 5 1.47k | content stringlengths 0 6.67M |
|---|---|---|---|
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.2.4 Method of test | Initial condition
System Simulator:
System Simulator: 2 MBMS cells, Cell21 and Cell24
User Equipment:
The UE is in CELL_PCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.2.5 Test requirements | At step 5, the UE shall perform the cell update procedure using the cause value “MBMS reception” set to “cell reselection” on cell 24.
At step 14, the UE shall perform the cell update procedure using the cause value “MBMS reception” set to “cell reselection” on cell 21.
At step 16, the procedure C.4 shall verify that t... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.3 MBMS Session Start (Frequency Layer Convergence)/Session Stop (Frequency Layer Dispersion) in CELL_FACH / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.3.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services.
8.5.3.3.2 Conformance requirement
The UE shall perform the MBMS frequency layer selection procedure upon receiving the IE "MBMS Preferred frequency information", when specified explicitly e.g. as in subclause 8.6.9.2, or when the preferred MBMS se... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.3.3 Test purpose | To verify that in CELL_FACH, the UE at session start re-selects to the preferred Frequency Layer for the MBMS services it has activated.
To verify that at session stop the UE re-select to the one of the frequencies indicated in the System Information. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.3.4 Method of test | Initial condition
System Simulator:
3 MBMS cells, Cell 21, Cell 24 and Cell 27
Table 8.5.3.3-1
Parameter
Unit
Cell 21
Cell 24
Cell 27
UTRA RF Channel Number
f1
f2
f3
Test Frequency ID
Mid Range
High Range
Low Range
CPICH Ec (FDD)
dBm/3.84 MHz
-60
-66
-66
P-CCPCH RSCP (TDD)
dBm
-60
-66
-66
User Equipment:
The UE is in C... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.3.5 Test requirements | At step 5, the UE shall perform the cell update procedure on cell 24 using the cause value “cell reselection” set to “cell reselection”.
At step 15, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message and the number of reported RLC SDUs shall be greater than zero.
At step 22, the UE shall perfo... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.4 MBMS Session Stop with Frequency Layer Dispersion - no previous frequency layer available (Idle Mode) / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.4.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.4.2 Conformance requirement | 1> if the IE "MBMS required UE action" is set to 'Release PTM RB':
2> stop receiving the concerned MBMS service;
2> if the UE is in a state other than CELL_DCH (for FDD) or if the UE is in Idle mode, URA_PCH or CELL_PCH state (for TDD); and
2> if the UE does not decide to receive an MBMS service; and
2> if the variable... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.4.3 Test purpose | To verify that in idle mode state, the UE performs frequency layer dispersion procedure at session stop, when no suitable cell in the previously stored frequency is found. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.4.4 Method of test | Initial condition
System Simulator: 3 MBMS cells (Cell 21, Cell 24 and Cell 27), with the downlink transmission power shown in column marked "T0" in table 8.5.3.5-1.
User Equipment:
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
The UE is in Idle M... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.4.5 Test requirements | At step 4, the UE shall respond on Cell 24.
At step 13, the UE shall respond on Cell 27.
At step 14 the procedure C.1 shall verify that the UE is in Idle Mode.
8.5.3.4m MBMS Session Stop with Frequency Layer Dispersion - no previous frequency layer available (Idle Mode) / MBMS Multicast Service
8.5.3.4m.1 Definition
Th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.5 MBMS Session Stop with Frequency Layer Dispersion - no previous frequency layer available (URA_PCH) / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.5.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.5.2 Conformance requirement | 1> if the IE "MBMS required UE action" is set to 'Release PTM RB':
2> stop receiving the concerned MBMS service;
2> if the UE is in a state other than CELL_DCH (for FDD) or if the UE is in Idle mode, URA_PCH or CELL_PCH state (for TDD); and
2> if the UE does not decide to receive an MBMS service; and
2> if the variable... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.5.3 Test purpose | To verify UE performs frequency layer dispersion procedure at session stop in URA_PCH state, when no suitable cell in the previously stored frequency is found. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.5.4 Method of test | Initial condition
System Simulator:
3 MBMS cells, Cell 21, Cell 24 and Cell 27
User Equipment:
The UE is in URA_PCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Bro... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.5.5 Test requirements | At step 3, the UE performs URA update on cell 24.
At step 10, the UE performs URA update on cell 27.
8.5.3.5m MBMS Session Stop with Frequency Layer Dispersion - no previous frequency layer available (URA_PCH) / MBMS Multicast Service
8.5.3.5m.1 Definition
This test is applicable for all UEs that support MBMS multicast... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.6 MBMS Session Stop with Frequency Layer Dispersion - no previous frequency layer available (CELL_FACH) / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.6.1 Definition | This test is applicable for all UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.6.2 Conformance requirement | 1> if the IE "MBMS required UE action" is set to 'Release PTM RB':
2> stop receiving the concerned MBMS service;
2> if the UE is in a state other than CELL_DCH (for FDD) or if the UE is in Idle mode, URA_PCH or CELL_PCH state (for TDD); and
2> if the UE does not decide to receive an MBMS service; and
2> if the variable... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.6.3 Test purpose | To verify UE performs frequency layer dispersion procedure at session stop in CELL_FACH state, when no suitable cell in the previously stored frequency is found. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.6.4 Method of test | Initial condition
System Simulator:
3 MBMS cells, Cell 21, Cell 24 and Cell 27.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.3.6.5 Test requirements | At step 3, the UE performs cell update on cell 24.
At step 10, the UE performs cell update on cell 27.
8.5.3.6m MBMS Session Stop with Frequency Layer Dispersion - no previous frequency layer available (CELL_FACH) / MBMS Multicast Service
8.5.3.6m.1 Definition
This test is applicable for all UEs that support MBMS multi... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4 MBMS Modification Request | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.1 Transmission of the MBMS Selected Services Information when entering RRC connected mode and CELL_DCH state / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.1.1 Definition | This test is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.1.2 Conformance requirement | A UE entering CELL_DCH shall initiate the MBMS modification request procedure in the following cases:
1> if the UE has any MBMS Selected Service; and
1> if the IE "MCCH configuration information" was received in System Information Block Type 5 or System Information Block Type 5bis prior to entering CELL_DCH.
A UE compl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.1.3 Test purpose | 1. To verify that when the list of MBMS Selected Services is not empty, the UE sends the MBMS Selected Services Information to the network when entering RRC connected mode.
2. To verify that when the list of MBMS Selected Services is not empty, the UE sends the MBMS Selected Services Information to the network when ent... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.1.4 Method of test | Initial condition
System Simulator:
1 MBMS cell.
User Equipment:
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
Related ICS/IXIT statements
- MBMS Broadcast service application availabl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.1.5 Test requirements | After step 3, the UE shall transmit an MBMS MODIFICATION REQUEST message.
After step 11, the UE shall transmit an MBMS MODIFICATION REQUEST message. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.2 Modification of the MBMS Selected Services list whilst in URA_PCH & Cell_FACH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.2.1 Definition | This test is applicable for Rel-6 UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.2.2 Conformance requirement | A UE in CELL_FACH, CELL_PCH or URA_PCH state shall initiate the MBMS modification request procedure in the following cases:
1> upon a change of the MBMS Selected Services; and
1> if the IE "Indicate changes in MBMS Selected Services" that is included in the MBMS GENERAL INFORMATION message is set to TRUE.
If the UE is ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.2.3 Test purpose | To verify that when a UE is in URA_PCH the introduction of a MBMS Service ID onto the MCCH does not trigger the UE to send a update to the network.
To verify that when the list of MBMS Selected Services is modified in the UE in URA_PCH or CELL_FACH, when the network indicates it should do so (in the MBMS General Inform... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.2.4 Method of test | Initial condition
System Simulator:
1 MBMS cell.
User Equipment:
The UE is in URA_PCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service application avai... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.2.5 Test requirements | In steps b, j, and l the UE shall not send MBMS MODIFICATION REQUEST.
In step e the UE shall transmit MBMS GENERAL INFORMATION indicating the list of selected services (Status = “None”).
In step g the UE shall transmit MBMS GENERAL INFORMATION indicating the list of selected services (Status = “Some”, MBMS Selected Ser... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.3 Testing of the MBMS Selected Services indication from the network whilst in CELL_DCH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.3.1 Definition | This test is applicable for Rel-6 UEs supporting MBMS broadcast services and MBMS p-t-m reception in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.3.2 Conformance requirement | A UE in CELL_DCH shall initiate the MBMS modification request procedure in the following cases:
1> the preferred frequency applicable for the MBMS service prioritised by upper layers is different from the currently used frequency;
1> upper layers request to discontinue reception of an MBMS service provided via a p-t-p ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.3.3 Test purpose | To verify that the UE updates the MBMS Selected Service Information at the introduction of a MBMS Service ID on the MCCH, when the UE is in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.3.4 Method of test | Initial condition
System Simulator:
- 1 MBMS cell.
User Equipment:
- The UE is in CELL_DCH state as specified in clause 7.6 of TS 34.108.
- The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service applicati... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.4.3.5 Test requirements | In step 3 the UE shall not send MBMS MODIFICATION REQUEST.
In step 5 the UE shall transmit MBMS MODIFICATION REQUEST indicating the list of selected services (Status = “None”).
In step 7 the UE shall transmit MBMS MODIFICATION REQUEST indicating the list of selected services (Status = “Some”, MBMS Service ID = ‘000005’... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5 MBMS Counting | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.1 MBMS Counting in Idle Mode / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.1.1 Definition | This test case is applicable for all UEs supporting MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.1.2 Conformance requirement | The MBMS counting procedure is used by the UE to inform UTRAN about its interest to receive an MBMS transmission.
…
The UE initiates the MBMS counting procedure for an MBMS transmission upon receiving an MBMS MODIFIED SERVICES message including IE "MBMS required UE action" with the value set to 'Acquire counting info' ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.1.3 Test purpose | To confirm that the UE starts the MBMS counting procedure in idle mode upon receiving an MBMS MODIFIED SERVICES message including IE "MBMS required UE action" and an ACCESS INFORMATION message including IE "Access probability factor – Idle" set to 0 (corresponding to the actual probability factor value 1).
To verify th... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.1.4 Method of test | Initial Condition
System Simulator: 1 MBMS cell (cell 21) using MCCH Longest Default scheduling, and combination C1 as defined in TS 34.108 clause 11.
User Equipment:
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_A... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.1.5 Test requirement | At step 3, the UE shall transmit an RRC CONNECTION REQUEST message with “Establishment Cause” set to “MBMS reception” on the uplink CCCH and including in case of MBMS Selected services the IE “MBMS Selected Service ID” of the concerned MBMS selected service within the IE “MBMS Selected Services Short” and the IE “MBMS ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.2 MBMS Counting in CELL_FACH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.2.1 Definition | This test case is applicable for UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.2.2 Conformance requirement | If the IE "MBMS required UE action" is included and concerns an MBMS activated service the UE shall:
…
1> if the IE "MBMS required UE action" is set to 'Acquire counting info' or set to 'Acquire counting info– PTM RBs unmodified':
2> perform the MBMS counting procedure as specified in subclause 8.7.4;
NOTE: If upper la... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.2.3 Test purpose | To verify that the UE correctly handles the counting procedure in cell_FACH state, upon receiving an MBMS MODIFIED SERVICES message including IE "MBMS required UE action" and an ACCESS INFORMATION message including IE "Access probability factor – Connected" set to 0.
To verify that the UE correctly includes the IE "MBM... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.2.4 Method of test | Initial condition
System Simulator: one MBMS cell (cell 21) using MCCH Shortest Default scheduling, and combination C1 as defined in TS 34.108 clause 11.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.2.5 Test requirements | At step 3, check that the UE performs the MBMS counting procedure by performing the cell update procedure using the cause value “MBMS reception" and using in case of MBMS Selected services the IE “MBMS Selected Service ID” of the concerned MBMS selected service within the IE “MBMS Selected Services Short” and the IE “M... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.3 MBMS No Counting in CELL_DCH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.3.1 Definition | This test is applicable for all UEs that support MBMS broadcast services and capable of reading MCCH in CELL_DCH state. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.3.2 Conformance requirement | If the IE "MBMS required UE action" is included and concerns an MBMS activated service the UE shall:
1> if the "MBMS required UE action" is set to 'None':
2> take no action with respect to this IE.
1> if the IE "MBMS required UE action" is set to 'Acquire counting info' or set to 'Acquire counting info– PTM RBs unmodif... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.3.3 Test purpose | To verify that the UE in CELL_DCH state (with the probability factor set to 1) does not perform the MBMS counting procedure. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.3.4 Method of test | Initial condition
System Simulator: one MBMS cell (cell 21) using MCCH Default2 scheduling, and combination C1 as defined in TS 34.108 clause 11.
User Equipment:
The UE is in CELL_DCH state as specified in clause 7.6 of TS 34.108. The UE has been registered in both CS and PS domains.
The UE is interested in the selecte... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.3.5 Test requirements | After step 2, the UE shall not perform the MBMS counting procedure.
After step 4, the UE shall not perform the MBMS counting procedure.
After step 6, the UE shall not perform the MBMS counting procedure.
8.5.5.3m MBMS No Counting in CELL_DCH / MBMS Multicast Service
8.5.5.3m.1 Definition
This test is applicable for all... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.4 MBMS Counting in CELL_PCH / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.4.1 Definition | This test case is applicable for UEs that support MBMS broadcast services.
8.5.5.4.2 Conformance requirement
The MBMS counting procedure is used by the UE to inform UTRAN about its interest to receive an MBMS transmission. The procedure applies to UEs supporting MBMS that are in idle mode or in connected mode. In conn... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.4.3 Test purpose | To verify that the UE correctly handles the counting procedure in cell_PCH state, upon receiving an MBMS MODIFIED SERVICES message including IE "MBMS required UE action" and an ACCESS INFORMATION message including IE "Access probability factor – Connected" set to 0 for the selected services.
To verify that the UE corre... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.4.4 Method of test | Initial condition
System Simulator: one MBMS cell (cell 21)
User Equipment:
The UE is in CELL_PCH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statements
- MBMS Broadcast service appl... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.4.5 Test requirements | At step 3, check that the UE performs the MBMS counting procedure by performing the cell update procedure using the cause value “MBMS reception” and using in case of MBMS Selected services the IE “MBMS Selected Service ID” of the concerned MBMS selected service within the IE “MBMS Selected Services Short” and the IE “M... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.5 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.6 Void | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.7 RRC Connection establishment for MBMS Counting :Success after T318 Timeout/ MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.7.1 Definition | This test case is applicable for UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.7.2 Conformance requirement | The MBMS counting procedure is used by the UE to inform UTRAN about its interest to receive an MBMS transmission. The procedure applies to UEs supporting MBMS that are in idle mode or in connected mode for cells not operating in MBSFN mode as indicated in subclause 8.1.1.6.3.
…
The UE initiates the MBMS counting proced... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.7.3 Test purpose | To confirm that the UE starts T318 timer once UE MAC layer indicates successful transmission of RRC Connection Request message for MBMS counting.
To verify that the UE continues to acquire MBMS ACCESS INFORMATION messages after Expiry of T318, and hence re-start RRC Connection Request procedure for counting. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.7.4 Method of test | Initial Condition
System Simulator: 1 MBMS cell (cell 21).
User Equipment:
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Longest MCCH scheduling configuration defined in 34.108 clause ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.7.5 Test requirement | At step 4 and 6, the UE shall transmit an RRC CONNECTION REQUEST message with “Establishment Cause” set to “MBMS reception” on the uplink CCCH and including the IE “MBMS Selected Service ID” of the concerned MBMS selected service within the IE “MBMS Selected Services Short” and the IE “MBMS Modification Period identity... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.8 RRC Connection establishment for MBMS Counting :Success after MAC Layer Failure Indication/ MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.8.1 Definition | This test case is applicable for UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.8.2 Conformance requirement | The MBMS counting procedure is used by the UE to inform UTRAN about its interest to receive an MBMS transmission. The procedure applies to UEs supporting MBMS that are in idle mode or in connected mode for cells not operating in MBSFN mode as indicated in subclause 8.1.1.6.3.
…
The UE initiates the MBMS counting proced... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.8.3 Test purpose | To confirm that the UE does not start T318 timer once UE MAC layer indicates un-successful transmission of RRC Connection Request message for MBMS counting.
To verify that the UE continues to acquire MBMS ACCESS INFORMATION messages after MAC layer failure indication for first RRC Connection Request transmission, and h... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.8.4 Method of test | Initial Condition
System Simulator: 1 MBMS cell (cell 21).
User Equipment:
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108.
The UE is interested in the selected service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Longest MCCH scheduling configuration defined in 34.108 clause ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.5.8.5 Test requirement | At step 7, the UE shall transmit an RRC CONNECTION REQUEST message with “Establishment Cause” set to “MBMS reception” on the uplink CCCH and including the IE “MBMS Selected Service ID” of the concerned MBMS selected service within the IE “MBMS Selected Services Short” and the IE “MBMS Modification Period identity”.
The... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6 MBMS Controlling Cell Change | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.1 MBMS Controlling Cell Change - Idle mode - Frequency Layer Convergence – HCS Not Used / MBMS Selected Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.1.1 Definition | Test to verify that the UE performs the cell reselection correctly if system information parameters Qoffset, Qhyst, Qoffmbms and Treselection are applied for non-hierarchical cell structures. This test case is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.1.2 Conformance requirement | When camped normally, the UE shall perform the following tasks:
- select and monitor the indicated PICH and PCH of the cell as specified in clause 8 according to information sent in system information;
- monitor relevant System Information. This is specified in [8];
- perform necessary measurements for the cell reselec... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.1.3 Test purpose | 1. To verify that a UE in idle mode calculates R from Qhyst, and Qoffset and Qoffmbms, which triggers the cell reselection evaluation process.
2. To verify that a UE in idle mode performs a Serving Cell Reselection to the Preferred Layer at Session Start.
3. To verify that a UE in idle mode performs an intra-frequency ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.1.4 Method of test | Initial Condition
System Simulator: 3 MBMS cells (Cell 21, Cell 24, Cell 26) with the downlink transmission power shown in column marked "T0" in table 8.5.6.1-1.
The UE is in Idle Mode as specified in clause 7.6 of TS 34.108 and camped on Cell 21.
The UE is interested in the broadcast service to be provided by the SS (... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.1.5 Test requirement | After step 6, the UE upon receiving an MBMS MODIFIED SERVICES INFORMATION message with IE "MBMS required UE action" set to 'Acquire counting info', shall perform the counting procedure.
At step 8, the UE shall send an RRC CONNECTION REQUEST message with "Establishment cause" set to 'MBMS reception'.
After step 15, the ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.2 MBMS Controlling Cell Change in CELL_FACH during ongoing session / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.2.1 Definition and applicability | This test case is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.2.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3 o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.2.3 Test purpose | 1. To verify that a UE in CELL_FACH state performs an inter-frequency MBMS Controlling Cell Change during an ongoing Session.
2. To verify that a UE in CELL_FACH state performs an intra-frequency MBMS Controlling Cell Change during an ongoing Session.
3. To verify that the UE is able to read MCCH in combination with FA... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.2.4 Method of test | Initial Condition
System Simulator:
3 MBMS cells, Cell 21, Cell 24 and Cell 26.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Specific message contents for Syste... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.2.5 Test requirement | After step 7 , the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message with the number of reported RLC SDUs shall be greater than zero.
After step 9, the UE shall transmit a CELL UPDATE message in Cell 24.
After step 15, the UE shall transmit a UE TEST LOOP MODE 3 RLC SDU COUNTER RESPONSE message w... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.3 MBMS Controlling Cell Change in CELL_PCH during ongoing session / MBMS Broadcast Service | |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.3.1 Definition and applicability | This test case is applicable for all UEs that support MBMS broadcast services. |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.3.2 Conformance requirement | The UE shall detect the available MBMS services by acquiring the MBMS MODIFIED SERVICES INFORMATION and the MBMS UNMODIFIED SERVICES INFORMATION messages without delaying reading of MCCH until the next modification period and without stopping at the end of the modification period, in accordance with subclause 8.7.1.3 o... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.3.3 Test purpose | 1. To verify that a UE in CELL_PCH state performs an inter-frequency MBMS Controlling Cell Change during an ongoing Session.
2. To verify that a UE in CELL_PCH state performs an intra-frequency MBMS Controlling Cell Change during an ongoing Session.
3. To verify that a UE in CELL_PCH is able to apply MBMS NEIGHBOURING ... |
4251e2eb3ecde7c73983ce7a4175ddf3 | 34.123-1 | 8.5.6.3.4 Method of test | Initial Condition
System Simulator:
3 MBMS cells, Cell 21, Cell 24 and Cell 26.
User Equipment:
The UE is in CELL_FACH state as specified in clause 7.6 of TS 34.108.
The UE is interested in the broadcast service to be provided by the SS (included in MBMS_ACTIVATED_SERVICES variable).
Related ICS/IXIT statement(s)
- MBM... |
Subsets and Splits
No community queries yet
The top public SQL queries from the community will appear here once available.