LamportRobotics/imago_pack_can_1k
1000 scripted demonstrations of one task in simulation, LeRobot v3 layout, 10 Hz (one frame per picture).
Task: Pick the can off the counter and put it in the tote.
The can stands somewhere new each time (x 0.33..0.44 m, y -0.32..-0.14 m in front of the robot) and weighs 0.25..0.6 kg. A scripted expert solves the grasp for that position and carries the can over the tote. 1457 attempts were run; 430 were out of reach for the expert and 8 missed the tote. Those are not in the set. An episode is kept only if the can ends in the tote and the robot is still upright.
Features
observation.state: 14 joint positions, radaction: 14 joint position targets, rad (what the expert commanded)observation.images.eye: the camera in the visor, 128 x 128 RGB at 10 Hz. The camera turns with the waist.
Joints, in order: waist_yaw, right_shoulder_pitch, right_shoulder_roll, right_shoulder_yaw, right_elbow, right_wrist_roll, right_wrist_flex, right_wrist_dev, right_index, right_middle, right_ring, right_little, right_thumb_swing, right_thumb.
The robot
Imago is Lamport's humanoid, a 1.50 m, 48 kg simulation model with five-finger hands, built in MuJoCo. It exists only in simulation. The task uses 14 of its 42 driven joints: waist yaw, the right arm (7) and the right hand (6). Joint zero is the standing pose.
Numbers
| episodes | 1000 |
| frames | 136000 |
| rate | 10 Hz |
| success rate of the expert | 1000/1457 attempts kept |
Load with LeRobotDataset("LamportRobotics/imago_pack_can_1k").
Generated by Lamport Robotics. The policy trained on these demonstrations is LamportRobotics/imago-pack-can.
- Downloads last month
- -